Two solutions for drone charging - UVA Power Plus team

Posted on

Project Introduction
The drone charging solution produced two products, three charging methods.
The first product is aimed at drones flying long distances, and people do not follow the aircraft.   For example, drone logistics, drones, national power lines, etc. We have developed a drone wireless charging pile to solve the cruising problem. Simply install the drone charging pile in advance on the flight of the drone. When the drone is running out of power, you can land it on the charging pile along the way and charge it automatically. After half an hour of full charge, continue to fly according to the previously set route. , direct to the destination.
There are two kinds of electric energy sources, one is solar charging mode , the solar panel power is up to 100W, and it can be filled in the midday sun only by the sun for half an hour, and the average sunshine is 4-6 times a day (Note: the solar panel can be expanded as needed) . The second type uses grid charging and is fully charged in half an hour. There are two charging methods, one is wireless charging , the maximum charging efficiency is 90%, and the fastest half an hour is full (design the coil size as needed). The second type is wired charging , which is full for half an hour.
"
The drone charging pile solves the problem of the drone's endurance in one stop, so that the drone can fly higher and further! His innovation is to help drones fly long distances, solar power, and green. Automatic return to charge, unattended, 24 hours to charge with the pile, full 70% of electricity within 20 minutes. Its system maintenance, investment and cost are low, and the installation cycle is short. It is convenient and intelligent to solve the problem that the drone can't fly long distances!
The second product is aimed at drones flying short distances, and the ground can not be installed with charging piles, such as outdoor travel, etc., we developed a drone charging package. The drone charging bag can be used to charge the drone in the backpack, and it can still be charged during the journey. This bag solves the problem that the rechargeable battery cannot be fully protected in long-term travel, and can be used as needed. You can save power for a long time, eliminating the need to maintain multiple original batteries. The weight is lighter than the original battery, and the cost is much lower than the original battery. At the same time, it can also supply power for survival devices, mobile phones, computers, etc.
team introduction
The UVA Power Plus team is from the Tsinghua University Creative Space Association.
Team members: Xi Yu (Captain) , Qin Boxiong, Chen Chaojie, Li Jialin.

Solid Carbide End Mills

Generally, for applications that require smaller diameters, solid Carbide End Mills are recommended even for roughing and semi-finishing.

OPT present to our clients a wide variety of solid carbide end mills, these tools are used for cutting cast iron, aluminum, copper, stainless, bronze, heat treated metals and so on. Clients should choose the right solid carbide end mills according to different machined materials, and seclect whether coated or coolant is needed per applications.

Advantage:

Suitable for dynamic milling

One tool for many materials

Cost effective tools


Features

Mills with 1, 2, 3 , 4,or 6 cutting edges

Roughing as well as finishing cutters

A selection of various geometries, comom used type are End mills, Radius end mills, Conical end mills and Roughing end mills etc.

Suitable for regrinding

Flexible in order quantity:

Samples can be provided before mass production, and MOQ can be discussed accordingly.


PRODUCT DETAIL:

Solid Carbide End Millssolid carbide end millsSolid Carbide End MillsSolid Carbide End MillsSolid Carbide End MillsSolid Carbide End MillsSolid Carbide End Mills8


PRODUCTING PROGRESS:

Solid Carbide End Mills

PAYMENT AND DELIVERY:

Solid Carbide End Mills

PRODUCT EQUIPMENT :

product equipment

ABOUT US :

We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD Inserts , PCD Reamers , PCD End Mills, PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc.,


We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.


Our best selling of cutting tools include PCD Inserts, PCD End Mill, PCD Ball Nose Mill, PCD Reamer, Carbide Taps , Carbide End Mill, Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.

Solid Carbide End Mills

quanlity control:


We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.

Solid Carbide End Mills

Solid Carbide End Mills,End Mill Bits,Carbide End Mill Bits,Solid Carbide Ball End Mill

OPT Cutting Tools Co., Ltd. , https://www.optdiamondtoolss.com