Today, the Xiaomi New Year Festival is officially launched. In addition to a large number of discounts, many new products have also begun to debut. A few days ago, Xiaomi officially launched a new version of Xiaomi headphones. This headset uses a graphene sounding diaphragm, and a new passive low-frequency radiator design has been added to bring a different musical experience. The new version of the Xiaomi headset is priced at 499 yuan, and it has been launched at the Xiaomi mall at 10:00 this morning. The official flagship stores of Xiaomi House, Jingdong and Tmall Xiaomi are also on sale. The new version of the Xiaomi headset weighs only 220g, has a line length of 1.4m, uses a 3.5mm I-shaped plug, an impedance of 32Ω, a sensitivity of up to 112dB, and a frequency response range of 20-20,000Hz. Similar to the previously launched Xiaomi ring iron headset Pro, Xiaomi's new headphones also use a graphene diaphragm. Graphene is composed of pure carbon and its hardness is 100 times that of steel, but at the same time it has a very light weight. It can effectively suppress the split vibration that is unavoidable in traditional headphones and bring pure sound. Good hardness and ultra-high thermal conductivity allow it to restore 100% of the current signal. Unlike the ordinary earphone diaphragm, the signal needs to be subjected to multiple attenuation to ensure that the diaphragm itself is not broken, which ultimately brings less distortion and more For real sound effects, the new version of the Xiaomi headset weighs only 220 grams. It uses high-quality protein leather earmuffs and is filled with soft sponges. It does not chuck or press the ears. It will not cause discomfort when worn for a long time. The Xiaomi headset retains the line-changing and portable folding design, and can be easily put into a bag after folding, which is convenient for carrying around.
WARNING!
Do not plug two or more meters together!
IMPORTANT
Don't plug in an appliance where the load exceeds 16 Amp. Always ensure the plug of any appliance is fully inserted into the meter outlet. If cleaning of the meter is required, remove from mains power and wipe meter with a dry cloth.
KEYBOARD DEFINITION
1). SET: Set price with button UP.
2). MODE: Exchange display state.
3). UP: Set price combined with button SET.
GENERAL FEATURES
1).Display line power.
2).Display and memory accumulative total power quantity.
3).Display and memory total power charge of price.
THE DATA DISPLAY
Press MODE button the data displays as follows:
W →KWh →PRICE →COST/KWH
↑_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _↓
1). Plug in socket and power on, the meter will display real power.
2). Press MODE button once again and release, the meter will display accumulative KWh.
3). Press MODE button once again and release, the meter will display total power charge.
4). Press MODE button once again and release, the meter will display COST/KWH.
SETTING PRICE OF COST/KWH
1). Press SET button during display COST/KWH,the first digital COST/KWH flash, press UP button to set it.
2). Press SET button once again and release, the second digital COST/KWH flash, press UP button to set it.
3). Press SET button once again and release, the third COST/KWH flash, press UP button to set it.
4). Press SET button once again and release, the fourth COST/KWH flash, press UP button to set it.
5). Press SET button once again and release, the radix point COST/KWH flash, press UP button to set it.
DATA CLEAR
Press and hold MODE button for 5 seconds will clear KWH,PRICE and COST/KWH data.
Power Backlit, Backlit socket, power meter Backlit, energy meter Backlit, backlit adaptor, backlit plug socket
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com