2.Office series:Computer,Printer,LCD Monitor,Scanning Machine etc.
3.Household Appliance series:Dust Collector,Fan Lamp or LED,Sewing Machine etc.
4.Kitchen Appliance series:Microwave Oven,Fridge,Freezr,Coffemarker etc.
5.Industrial Equipment series:Shipping,Vehicle,Metalhalide lamp,Solor system,Wind power generation etc.
6.Electric filed series:TV,VCRS,Radio ect.Â
MODEL |
                  DR-240-24 | |
OUTPUT |
DCVOLTAGE |
24V |
RATEDCURRENT |
10A |
|
CURRENTRANGE |
0~10A |
|
RATEDPOWER |
240W |
|
RIPPLE &Â NOISE (max.) Note.2 |
80MVP-P |
|
VOLTAGEADJ.RANGE |
24~28V |
|
VOLTAGE TOLERANCE Note.3 |
±1.0% |
|
LINEREGULATION |
±0.5% |
|
LOADREGULATION |
±1.0% |
|
SETUP.RISEHOLD.TIME |
800ms,40ms/230VACÂ Â 800ms, 40ms/115VAC at full load |
|
HOLD UP TIME (Typ.) |
24ms/230VACÂ Â Â Â Â Â Â Â Â Â 24ms/115VAC at full load |
|
INPUT |
VOLTAGERANGEÂ Â Â Â Note.6 |
85 ~Â 264VACÂ Â Â Â Â Â Â Â Â Â 120 ~Â 370VDC |
FREQUENCYRANGE |
47~63HZ |
|
POWER FACTOR (Typ.) |
0.96/230VACÂ Â Â Â Â Â Â Â Â Â 0.99/115VAC at full load |
|
EFFICIENCY (Typ.) |
84% |
|
AC CURRENT (Typ.) |
2.8A/115VACÂ Â Â Â Â Â Â Â Â Â 1.4A/230VAC |
|
INRUSH CURRENT (Typ.) |
COLD START 27A/115VACÂ Â Â Â Â Â Â Â Â Â 45A/230VAC |
|
LEAKAGE CURRENT |
<3.5mA /Â 240VAC |
|
PROTECTION |
OVERLOAD |
105~150%rated output power |
Protection type :Â Constant current limiting, recovers automatically after fault condition is removed | ||
OVER VOLTAGE |
30~36V |
|
Protection type :Â Shut down o/p voltage, re-power on to recover | ||
OVER TEMPERATURE |
100±5 (TSW1) detect on heat sink of power transistor |
|
Protection type :Â Shut down o/p voltage, recovers automatically after temperature goes down | ||
ENVIRONMENT |
WORKING TEMP |
-10~+70 (refer to output load derating curve) |
WORKINGHUMIDITY |
20~90% RH non-condensing |
|
STORAGE TEMP HUMIDITY |
-20~+85, 10~95%RH |
|
TEMPCOEFFICIENT |
±0.03%(0~50) |
|
VIBRATION |
Component:10 ~Â 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, ZÂ axes; Mounting: Compliance to IEC60068-2-6 |
|
SAFETY&EMC Note 4) |
SAFETYÂ Â STANDARDS |
UL508, UL60950-1, TUV EN60950-1 approved |
WITHSTAND VOLTAGE |
I/P-O/P:3KVACÂ Â Â Â Â I/P-FG:1.5KVACÂ Â Â Â Â O/P-FG:0.5KVAC |
|
ISOLATIONRESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
|
EMI CONDUCTICN& RADIATION |
Compliance to EN55011, EN55022(CISPR22)classB |
|
HARMONICCURRENT |
Compliance to EN61000-3-2,-3 |
|
EMS IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A |
|
QTHERS |
MTBF |
105.5Khrs min MIL-HDBK-217F(25) |
DIMENSION |
125.5*125.2*100mm(L*W*H) |
|
PACKING |
1.2Kg; 12pcs /Â 15.5Kg /Â 1.29CUFT |
|
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltages. Please check the derating curve for more details |
Â
Q:How to order our product ?Â
A:1).Please tell us the model and quantity and other request you need.Â
   2).We make the PI for you.
   3).After you confirm the PI, we arrange the order for you after receiving your payment.
   4).After the goods finished, we send the goods out to you and tell you the tracking number.
   5).We will track your goods until you receive the goods.Â
Q:Â Â What's your warranty ?
A: One years
Q: What's your contact information:
A: Our address: Liushi town, Zhejiang province, China.   Â
Q: What's your shipment method?
A: We ship by Express, by air, by sea, by train. Normally we checked and compare, then provide customer the most proper shipment method.
Q: What's about MOQ?
A: First order MOQ=1pcs
Q: If i want to release order, what's the payment method you accept ?
A: We accept T/T, Paypal, Western union, L/C.
Q: If i want to release order, what's the process?
A: Thanks. You can send inquiry to us by alibaba, or send us by email, we will reply within 24hrs.
Thank you & Now pls send your  kindly inquiry !  ^!^
YUEQING YUMO ELECTRIC CO.,LTD
TEL:0086-577-62791815Â Â Â Â Mobile:0086-18072050936
Â
How to contact us:
       Send your inquiry detail in the below for free samples, click "send "now.
Control cable is a kind of cable. It is used for control and monitoring circuits and protection circuits with AC rated voltage of 450V/750V and below. Shielded control cables are widely used in power plants and power stations due to their good shielding performance. They are intended to be laid indoors, in cable trenches, in pipelines, directly buried, in shafts and other fixed places that can withstand greater mechanical tension.
Feature
1. DC rated current Uo/U is 450/750V2. The maximum allowable long-term operating temperature of the cable electrical conductor is 70 ℃.
3 The working temperature during cable laying shall not be lower than 0 ℃. If the natural environment temperature is lower than 0 ℃, the cable shall be heated.
4 The strongly recommended allowable bending radius of cable is below:
The unarmoured cable shall not be less than 6 times of the cable diameter;
Armored cable or copper foil shielded cable shall not be less than 12 times of cable diameter;
The shielded Flexible Cable shall not be less than 6 times of the cable diameter.
5 Productive cable model 2-61 cores
6 Control cables are generally laid in rooms, cable trenches, pipelines and other fixed sites.
Copper Conductor PVC Jacket Control Cable,Armoured Control Cable,Multi Core Control Cable,Sheathed Control Cable
Ruitian Cable CO.,LTD. , https://www.rtpowercable.com