HP Laser Jet Pro MPF M128fp initial experience
I used the HP LaserJet 3050, which was a 2007 brick-and-mortar clerk. The office printer used the 2007 HP LaserJet 3050. The partners who have used this printer may know that this printer is a nightmare to download the driver under the XP system. I have frequent requests for fax, scanning and photocopying functions because of my work needs. The 3050 is also a minor problem with frequent minor problems. Occasionally, the scan function disappears. (Do not ask me why I have this condition. After 3050 you will understand.) There is also a continuous scanning function of the goods has been disabled, and many irregular materials can not be happily scanned and copied, and decided to apply to the leadership for the HP Laser Jet Pro MPF M1213nf.
Thanks to the party and leaders for their care for me, they were given approval in a week, and they were still the goods of the tea house. The HP Laser Jet Pro MPF M128fp was actually received.
3050 ready to retire
M128 carton
Front view
Overlooking the map, the phone is not installed, installed on a very large
Out of the box will not be sun, after enjoying the thrill of a burst of tears, the real machine came out. He usually uses a telephone, so the random mini-phone is not installed. Here is a feeling of appearance, leadership is really good, M128fp appearance more full than M1213nf, touch more silky, more rounded corners, more perfect details, a little Lexus feeling. The most irritating is the switch, which is on the side of the small control panel. When it is turned on, it is bright white, it will shine, and it will glow. The equipment is very energy-saving, and usually it will enter the energy-saving mode without operation, and then the switch will be flashing and shining. In short, it is more than my other M1213nf.
JD link http://item.jd.com/1103406.html
Well, the following enters the installation process, in the appearance of the embarrassment, it is not practical to use eggs.
Computer Model Lenovo ThinkCentre Desktop (Scan Time: November 02, 2015)
Operating System Windows XP Professional 32-bit SP3 (DirectX 9.0c)
Processor Intel Pentium Dual Core E2180 @ 2.00GHz
Motherboard Lenovo To be filled by OEM (Intel 945G/GZ/P/PL - ICH7)
Memory 2 GB (Sricom Rick DDR2 666MHz / Memory Technology DDR2 666MHz)
Seagate ST380815AS main drive (78 GB / 7200 rev / min)
Graphics Card Intel 945G Integrated Graphics Controller (Lenovo)
Monitor Lenovo LEN240B LEN L171 ( 17.1 inches )
Audio Devices Analog Devices AD1988 @ Intel 82801G Hi-Fi Audio
NIC Karen RTL8139/8139C/8139C+ Fast Ethernet Adapter / Lenovo
The first step is to uninstall the original 3050 driver and completely delete it with the 360 ​​software housekeeper.
The second step: restart, install the new driver.
Setup error
Driver error
This should be eased because I stuck for 24 hours in the second step. Why?
Fault 1 The installation program turns on the wireless roll blue bar, which means the installation software cannot be opened. HP YouTM teases me.
Solution Install .net 3.5 sp1, there is a random CD, file name dotnetfx35.exe, but HP is sloppy and forget to tell you how to do this case. It is too lazy to find it and download, install, and restart it in accordance with the link provided by HP engineers. ok can finally enter the installation interface.
Fault 2 installed the second stage, connected the device, the device could not be connected, "Hewlett-Packard HP Laser Jet Pro MPF M128fp installed an error occurred when the system can not find the specified file" I went to your XXX, what kind of aircraft?
Solution This place you will end up with 1%-100% infinite install error loop.
Step one: Uninstall the driver: Right-click the decompression driver, and then unzip the folder to find HP.Uninstall, double-click to uninstall the old driver
Step 2: Delete the oem file: Under xp system, click Start - Run - enter inf and delete the file beginning with "oem" other than oem0.inf and oem0.PNF
Step 3: Important! Make sure your RPC service is turned on. This is what I have come up with repeatedly, RPC (Remote Procedure Call Protocol) - remote procedure call protocol
This service does not start with the boot, or it will die and the printer will not connect properly. 360 security guards by default close this startup item.
Step 4: After completing the above three resolution steps, enter the installation process normally. Remember that when the installation program prompts you to connect the printer, connect the printer to the computer.
The third step: finally normal, computer driver installation ok, instant connection is complete, all kinds of next step, complete the software installation.
Here again, the test paper will not be printed. Here will be explained. There is also a problem that the printer control panel repeatedly prompts the cartridge memory shortage, what is wrong, this problem is actually the cartridge above the chip part has an orange plastic clip does not collapse caused by, removed after the normal, well ~ HP original Consumables, model CC388A, forcing full, but also for verification.
This is the evil card that will cause the cartridge to report an error
Drive OK, scan test OK, copy OK, fax OK, really cool, normal print files, lying? How did you react? All drivers are OK, there is no indication of fault reporting? Careful will find that the printer task process, you want to print the file will flash over, this is a few ghosts?
In the fax settings device self-test results can be printed, normal text can not print it? Back to the problem that the test paper could not be printed, the reason is that the M128fp cannot print documents in the XP system environment! I have a big slot, you TM funny me!
Calling HP's technical support for the fourth time is still a common phenomenon!
"Dear Mr. Xu, Hello!
You have received a technical guide or drive link from HP's after-sales telephone support engineers and would like to be able to help you.
Please click the link below to browse the specific content:
Mr/Ms, I have sent you simple steps to solve your current problem. Here are the ways to add printers to usb: Click the Start menu, the xp system finds printers and faxes (Settings - Printer Fax), win7/win8 system finds devices and Printer, click on Add Printer - Add local printer, xp system remove the check before the automatic detection, select the port for the beginning of usb, and then click on the disk to install - click Browse, browse the CD or download from the official website to the desktop new folder after decompression The file, find Autorun.inf, appears your printer model, select, and then click Next, choose not to share the printer, click Finish. If you have any other problems, you can try the number engineers at any time. Please do not reply to this message.
If the above link still does not solve your problem or you have other technical questions, please do not reply to this email.
Trouble you call HP after-sales support consultation, service time: 8:30-21:00; phone: call 8008206616 for fixed line, 4008856616 for mobile phone,
Or visit Hewlett-Packard intimate service website:
Simply put, it is to download a HP LaserJet professional P1108 print driver instead of the M128fp print driver, well, step by step according to the message content prompts, finally, to set the default P1108 printer to play the first paper, toss the 24 hours of my tears!
At this point, I finally started to enjoy a happy and pleasant flight. I have put the Win7 system on the table to prepare the redo system.
Print experience, when only printing a sheet of paper, the response is still relatively fast, but at the same time print two, or in the case of high-end professional players like me multi-text printing, M128fp will quietly sell Meng, wait half Minutes later, hey, work, then print slowly. The corresponding speed is really inferior to 3050 and M1213nf.
Special sun exposure Zhang Aunt maiden posts, can be regarded as a technical summary of the M128fp one machine. After XP stopped updating, it really couldn't keep up with the big HP that forced the grid to full, so when you valued your friends to start this printer, don't complain about this, what is not good to return anything, the machine is very good, print scan The fax quality is very high. Either Win7 or above is used. If you use XP, you can refer to this post solution. Now that Win10 compatibility is not yet available, it is said that there are many problems. Don't be afraid to hit the HP printer after-sale 8008206616, the siege lion will be very patient to solve all your problems.
24V Power Battery,Lithium Pack Charger,Lithium Battery Technology,Lithium Polymere Battery
Sichuan Liwang New Energy Technology Co. , https://www.liwangnewenergy.com