Murata Electronics North America , an innovator in electronics and the largest global supplier of ceramic passive components, recently introduced an anti-fuse element for light emitting diodes (LEDs). Developed to control open defects in LEDs, Muratas anti-fuse device prevents the lowering Of power supply voltage, typically observed in Zener diodes, which results in higher energy efficiency. Other key benefits include a simple and economical circuit design, the reduction of color unevenness and small size.
The LEDs are typically connected in series and therefore are at risk of failure if a single LED becomes open. The solution is to re-route current flow around the open LED. Muratas new anti-fuse element is connected in parallel to a serial LED, enabling each LED to stay lit should one become open. This allows for uninterrupted and even light, reduced maintenance costs and increased energy efficiency. The companys anti-fuse element Can be used in all LED lighting fixtures and is especially well suited for large outdoor lights that generally require more maintenance.
The anti-fuse element measures 1.0mm x 0.5mm x 0.5mm. However, 0.6mm x 0.3mm and 0.4mm x 0.2mm sizes are in development. The allowable current is 350mA with a nominal voltage of 4V and a trigger voltage of 20V Before activation, the insulating resistance is 1MΩ and the resistance after activation is less than 3Ω. This new product is available in sample quantities for 40 cents and lead times are approximately eight to 10 weeks starting January 2010.
Oem Busbar,Flexible Busbar Manufacturers,Flexible Busbar Current Rating,Flexible Busbar Connections
Flexible Busbar,Bended Rigid Busbar Co., Ltd. , http://www.nbrigidbusbar.com