Company profile
Â
Shanghai Xiaowei Equipment Co., LTD (Xiaowei) was established in 2011, Shanghai, which is a company covering cable and accessories manufacturing, engineering service and trading.
As a National wide wire &cable supplier Xiaowei continually provide different quality products in the telecom communication fields, the main product is 7/8 feeder cable, 1/2 feeder cable, feeder claim, feeder tools, all kind of the male, female, DIN, connector feeder connector, feeder grouding kit, grounding bar, low loss 7/8 jumper cable and 1/2 jumper cable, indoor optic jumper cable and outdoor fiber cable, splitter and coupler, Dual and trible band antanna, GPS antenna and GPS cable all the accessories in the telecom field.Â
    Â
Xiaowei have advance manufacturing product line, stanard factory, we have long co-operation with the Chinese main telecom operators such as China Mobile, China Unicom, China Telecom. And the electric power operator such as National Electric network company, Southern Electric power company. Xiaowei provides total solution for telecommunication, power grid, railway, engineering, green energy, automobile industries, etc.
       Â
Xiaowei particularly focused on the QoS and creating value for its clients and stakeholders, continuously invest in R&D, marketing & service networks, meeting and exceeding the precise needs of our customers national wide. With the develop of the business, Xiaowei extend the service to the international trading.
Â
RG-58U Cable Assemblies / Assembly
Applicable for connecting feeder cables with 8TS equipment and antenna, unnecessary of additional waterproof measures, such as waterproof gel or tape, meets waterproof standard IP68.
Standard lengths: 0.5m, 1m, 1.5m, 2m, 3m, customer special requiremnts on jumper length could be satisfied.
Characteristics & Applications
Electrical Spec. | ||
Vswr | ≤ 1.15 (300MHz-2500GHz) | |
Dielectric withstanding vlotage | ≥1000V | |
Dielectric resistance | ≥5000MΩ(500V DC) | |
PIM3 | ≤ -138dBc@2x30W | |
 Operating temperature | - 40oC ~ + 85oC | |
Insert loss | It depends on leghth of cable | |
Weatherproofing standard | IP68 | |
Cable length | Customized | |
Jacket | Â Heat shrink tubing | |
Connector applicable | N Type | DIN Type |
SMA | / |
Structure and performance parameters | ||||
  RG58 Cable |  Connector | |||
Material | Inner conductor | Tin plated copper wire (Φ19x0.18mm) | Inner conductor | Brass, tin phosphorus bronze, tinnedt, hickness≥3μm Orichalum plating, hickness ≥0.2μm |
Dielectri material | Polyethylene (Φ2.95mm) | Dielectri material | PTFE | |
Outer conductor | Tin plated copper wire braid (Φ3.45mm) | Outer conductor | Brass, tri-alloy plated, thinkness≥2μm | |
Jacket | FPE/PE/PVC(Φ4.95mm) | Nut | / | |
Color | Customized | Sealing ring | / | |
Electrical and Mechanical Spec. | Characteristic impedance | 50Ω | Characteristic impedance | 50Ω |
Vswr | ≤ 1.15(DC-2500GHz) | Vswr | ≤ 1.15(DC-2500GHz) | |
Standard capacity | 101.05 pF/m | Frenquency | DC-11GHz | |
Velocity | 66% | Dielectric withstanding voltage | ≥2500V | |
Attenuation | ≥120 (dB) | Contact resistance | Inner conducter ≤ 5.0mΩ Outer conducter≤ 2.5mΩ |
|
Insulation resistance | ≥5000MΩ | Dielectric resistance | ≥2500MΩ, 500V DC | |
Peak voltage | 1.13KV | Durability | ≥500 | |
Peak power | 40KW | Pim3 | ≤ -155dBc@2x20W |
Detailed Images
Â
Â
Heater is a combination of fans, motors and air heaters combined unit. Applicable to all types of workshops, when the air is free of dust and flammable or explosive gas, can be used as a circulating air heating. Heater can be used independently as a heating, generally used to supplement the lack of heat sink parts or the use of radiators as the duty of heating, the remaining heat load borne by the heater.
(1) horizontal blower: indoor air from the side of the inhalation, the heat exchanger after the heat, the horizontal direction. The jet has a certain range, so that the heating zone is fully blended, the temperature is evenly mixed.
(2) top blower fan: axial fan placed in the bottom of the unit, the air from the side of the heater into the air through the standing heat exchanger, and then sent down. In order to make the jet face to be discharged downward, a guide vane for diffusion is provided at the outlet of the fan.
(3) floor heaters: such units of the large amount of air, send hot air range far, can afford a larger area of heating. When running, the noise is large. Applicable to the factory building heating.
The advantage of heater heating is [2]:
(1) single machine heat supply, in the same heat load, the number of end devices used less;
(2) small heaters can be hanging, do not take up the building area, large heaters floor installation, covers an area of limited;
(3) start heating up fast.
Fan Heater
Fan Heater, Portable Electric PTC Fan Heater, Square Nice Electric Heater, Desktop Portable Electric Fan Heater
Ningbo APG Machine(appliance)Co.,Ltd , http://www.apgelectrical.com