Foreword: "Neon (Lightbox) Advertising Engineering Technical Regulations" is designed to adapt to the development of the growing neon (lightbox) advertising, to standardize technical procedures and ensure the quality of the project. This regulation has been organized by Zhongnihui to organize relevant technical and technical personnel according to the relevant technical standards that have been issued in China, and combined with the long-term installation engineering practice of the industry, extensively solicit opinions from experts from all major provinces and cities in the country as well as relevant technical and quality supervision departments. After repeated revisions and after being reviewed and approved by the Second Committee of the Second China National Committee, it was approved by the China Advertising Association as an industry standard. In the trial process, if defects are found, please send your comments and relevant information. Neon Secretariat, for future reference. This regulation is based on: 1. GB50259-96 electrical installation engineering, electrical lighting installation and acceptance specifications 2, TB1/104-94 neon installation standard 3, DB31/101-92 neon transformer 4, DB31/100- 92 Neon 5, DB11/074-1997 Neon Installation Specification 6, DB32/176-1997 Neon Installation Specification Main drafters of this procedure: Chen Yuanguan, Wen Bo'an, Yan Yuming, Zhao Yuanqing, Yang Qi and Neon (lightbox) Advertising Engineering Technical Regulations (Trial) (ND/T105-1998) 1. General 1.0.1 is to adapt to the development of neon (lightbox) advertising, standardize technical regulations, ensure project quality, maintain social benefits, and specially develop neon (lightbox) advertising engineering technical regulations (hereinafter referred to as procedures) ). 1.0.2 This procedure applies to the design, fabrication, installation and acceptance of indoor and outdoor neon lights (light boxes). 1.0.3 The design, production, installation and acceptance of neon lights (light boxes) shall, in addition to complying with the provisions of these Regulations, comply with the Advertising Law of the People's Republic of China and the relevant standards promulgated by the current state, industry and region. Specification and regulations. 1.0.4 Neon lights (light boxes) design, construction drawings, electrical circuit diagrams should comply with the design principles and installation process requirements specified in the "Procedures". 1.0.5 The main materials used in neon lights (light boxes) and the quality of electrical products should comply with the current standards. 1.0.6 Outdoor large neon (light box) iron frame structure should be designed or approved by the architectural design department. 1.0.7 Neon lights (light boxes) construction safety, labor protection, fire prevention, should be implemented in accordance with current national regulations. 2, neon (lightbox) advertising design 2.1 basic principles of design 2.1.1 advertising design content is true, legal, in line with the requirements of socialist spiritual civilization. 2.1.2 Advertising design must ensure the safety of the building, and the building load-bearing structure and building structure must not be arbitrarily changed. 2.1.3 Advertising design shall not damage the facade of the building. If it is necessary to change, it must obtain the consent of the relevant departments and construction units. 2.1.4 Roof advertisements and signage advertisements must have a certain degree of wind resistance, meet the requirements of the 12-level typhoon, and ensure safety (except as otherwise provided by the relevant departments of the region). 2.1.5 Advertising design shall implement the relevant provisions of the design codes for construction, electrical, fire prevention and environmental protection promulgated by the State. 2.2 The design of neon advertising 2.2.1 The design of the screen should reflect the content of the advertisement, and the artist's good artistic quality will give people a feeling of beauty. 2.2.2 According to the user's requirements, the neon advertisements must be designed with clear patterns, simple text and bright colors. 2.2.3 The neon advertising screen can be painted, painted or outdoor sticky notes and other materials. 2.2.4 Neon tube design must maintain the gap between the tubes is not small and 6cm. 2.3 Light box design 2.3.1 Light box can be designed with light cloth, spray or instant lettering and other forms. 2.3.2 When the light box is internally lighted, the arrangement of the tubes must be uniform, and the screen should not show obvious shadows or light leakage, which will affect the picture effect. 2.3.3 When the light box is illuminated by external lighting, the lighting effect should be even and bright to avoid glare. 2.3.4 Light boxes are made of neon lights or neon lights combined with other light sources. Light box materials should be made of flame retardant materials. 2.4 Design of steel structure 2.4.1 The design of steel structure shall be submitted by the approved architectural design unit or by a qualified designer. 2.4.2 The design of the steel structure must comply with the architectural design code.
1 2 3 Next Page
1 2 3 Next Page
Flexographic Alum Foil Printing Machine
Printing Machine,4 Color Printing Machine,Flexo Printing Machine
Syngood Machine Co., Ltd. , http://www.jnprintingmachine.com