Popular High Quality Transmission Line Tower

Posted on

  • Model NO.: wx-18
  • Conductor Circuit: Multi Circuit
  • Standard: Standard
  • Quality: High Quality
  • Variety: Can Be Customized
  • Transport Package: as Requirement
  • Origin: China
  • Usage: Flying Angle Tower, Crossing Tower, Tension Tower, Angle Tower, Terminal Tower, Transposition Tower, Branching Tower
  • Certification: ISO, GS, RoHS, CE
  • Way: Galvanized
  • The Delivery Speed: Fast
  • Trademark: WUXIAO
  • Specification: CE
we also have other types of products:
wePopular High Quality Transmission Line Tower
Popular High Quality Transmission Line TowerPopular High Quality Transmission Line Tower110KV-1000KV power transmission line Lattice tower 
Material 
Usually Q345B/A572, minimum yield strength>=345n/mm2 
Q235B/A36, minimum yield strength>=235n/mm2 
As well as Hot rolled coil from Q460, ASTM573 GR65, GR50, SS400, SS490, to ST52- 

1. ISO,CE and AWS Certificate 
2.23years production experience 
3. Material: Q235, Q345, Q420B 
4. Hot DIP galvanization 
5. OEM is welcome 
6. High quality with reasonable price 
7. Can produce various height and structural tower 
8. Monthly production capacity can reach 10000 Metric tons 
3 Performance Standard 
Besides conforms to the drawing and design, the materials and fabrication of tower components shall conform to the following standards (Chinese Standards) and customer's requirements. 
4. Steel pipe tower welded requirements 
1 )we used CO2 welding and submerged arc auto welding or other methods. 
2 )Welded seam shall be full penetration and grinded. 
3 )The welded product has no fissure, scar, overlap, layer or other defects. 
5. Steel tower Galvanization 
All steel items, bolts, nuts, washers & other components to be hot -DIP galvanized with uniform. As per (ASTM-A-123).
Type Straight Pole ,Tensile Pole ,Turn Pole
Suit for Electricity distribution.Transmission line
Material Usually   Q345B/A572,minimum yield strength>=345n/mm2 as main material  Q235B/A36,minimum yield strength>=235n/mm2- as auxiliary material.Q420B
Joint of Poles Slip joint connection or flange connection

SD Card Connector

Antenk extended its connector product range by SD card connectors. As already mentioned there are various applications, in the past driven by the computer industry, which are using memory cards as well in their end products, single sided pressure contact connectors can be designed and manufactured according to a customer specific requirement based on customer dedicated insulator- and contact dies. Such single sided pressure contact connectors are mainly used as board to board connection on the base of direct contact to the pads on the board.


Compact Flash Card Connector Overview

Store More Memories
Compact Flash storage cards are small, removable, mass-storage devices. They electrically comply with Compact Flash Association standards, the PC Card ATA standard, and run in True IDE mode. These 50-position cards typically hold between 32 MB and 2 GB of memory and are about the size of a matchbook. Antenk`s connectors include headers that can accept Type I (3.3mm thick) or Type II (5.0mm thick) storage cards, flush and raised mounting heights, and ejectors. Antenk Compact Flash card connectors also provide electrostatic discharge protection.Adapter for Compact Flash Card type I and II
Available with various ejectors
Different stand offs heights
Reverse type without stand-off height is not applicable to Compact Flash Card Type II


Compact Flash Card Connector Specification
Insulation Resistance: 1000MΩ at 500V DC
Withstanding Voltage: 500Vrms
Current Rating: 1A AC/DC max.
Contact Resistance: 40mΩ max. at 20mV max.
Operating Temp. Range: -55°C to +85°C
Reflow Solder Temp.: 220°C min. / 60 sec, 260°C peak
Mating Cycles: 10,000 times
Materials and Finish
Insulator: LCP, glass filled (UL94V-0)
Push Button: Glass reinforced PBT (UL94V-0)
SMT Metal: Brass, pure Sn
Pivot Shell: Stainless Steal
Contacts: Brass
Plating: Contacts - Gold (15µ[) over Nickel (40µ[), Solder Tails - pure Sn

Compact Flash Card Connector Product Features
Compact Flash Connectors
Robust surface-mountable designs
Proven PCMCIA contact technology
Accepts hardware for mechanical mounting
Top- and bottom-mounting styles
Right-angle and vertical orientations


Compact Flash Connectors Applications
Desktop and laptop computers
Digital cameras
Smart phones
Data recorders
Slot machines
Industrial and embedded computers

SD Card Connector,Tf Card Connector,Sd Card Connectors,Natural Cf Card Connector,Compact Flash Card Connector,CF cards types I/II,CF Card connector MA type Adapter,CF Card connector MA type Ejector

ShenZhen Antenk Electronics Co,Ltd , https://www.atkconnectors.com