The price of Apple Watch ranges from $349 to $17,000, depending on how much consumers like local gold. Looking at the situation, Apple's new product has a very good profit margin.
After disassembling the 38mm Apple Watch sports version, research firm IHS said its manufacturing cost was about $83.70.
Specifically, the display cost of the OLED panel and Ion-X surface glass is the highest, which is estimated by the Korean electronics company LG, which is estimated to be $20.50, and the cost of the S1 processor is estimated to be $10.20. In addition to component costs, IHS estimates a manufacturing cost of $2.50, so the total original cost is $83.70. IHS did not disassemble the stainless steel and gold versions of the Apple Watch.
At $83.7, this is only 24% of the retail price of the product. Based on other Apple products reviewed by IHS, this hardware cost to retail price ratio is the lowest of any Apple product. According to IHS's past disassembly analysis, the ratio of hardware cost to retail price of other Apple products is between 29% and 38%.
“For the first generation of products just launched, the retail price is relatively high compared to the hardware cost, which is quite typical,†IHS senior chief analyst Kevin Keller said in a statement. Retail prices will always fall over time, but the hardware cost and retail price ratio of this Apple Watch is lower than the iPhone 6 Plus and other new Apple products we have dismantled. If the product sales results If it is comparable to the interest it generates, then this will be of great benefit to Apple’s profits."
Still, the analysis of these parts and manufacturing costs may not make much sense. Such disassembly only focused on component and manufacturing costs, but did not consider other significant costs associated with the product. In Apple’s financial report conference for the second quarter of fiscal 2015, Apple CEO Tim Cook directed the artillery fire at such disassembly analysis, claiming: “I have not seen which analysis results are close to accuracy.â€
IHS analyst Keller added in a telephone interview that the cost associated with software for new hardware products could be significant, especially for the first generation with new features - like the Force Touch feature. It can distinguish the user's touch and long press on the touch screen. IHS also did not take into account other potential cost variables, including patent licensing, supply chain logistics, and R&D.
Keller said that during the dismantling process, IHS also found that the so-called TapTIc Engine occupies most of the internal space of the Apple Watch (about 30%) - this is a miniature motor in the watch, used to simulate The user presses the tactile feedback of the operation. However, Apple may still have room to shrink this feature, making the watch even smaller.
Interestingly, according to the Wall Street Journal quoted people familiar with the matter, Apple seems to have encountered production problems with the China Shenzhen AAC Technology Holdings Co., Ltd., one of the suppliers on the touch engine. According to reports, the tactile engine produced by this company will be damaged over time. This may be the reason for the delay in shipping Apple Watch.
----------------------------
Take control of the wearable core design and give you an in-depth understanding of the connectors that can't be ignored in wearable devices. For details, please pay attention to: Electronic enthusiasts March Connector Technology Special Issue
Analysis of advantages and disadvantages of 4G industrial routers
First, what is the classification of industrial routers?
Industrial Router (a communication device that can be divided into 2G routers, 2.5G routers, 3G routers and 4G routers according to network standards.
For users, you can communicate with the Internet by setting a default gateway on your PC or network device. In fact, the default gateway configured for network devices is the packet export for network devices. After the packet is sent to the Ethernet port of the router, the router performs the next job, so the router is an Internet relay.
Second, how do industrial routers work
So how does the router forward the packet? Just like getting somewhere, you need to place a route. This route is a routing table. This routing table contains all the destination network addresses owned by the router, as well as the best path to reach those networks through the router. This is because there is a routing table, so the router can forward packets according to the routing table. That's how routers work.
Understand what is an industrial router and how it works, it is not difficult to understand the advantages and disadvantages of the router. Here we focus on the advantages and disadvantages of 4G industrial routers.
Third, the advantages of 4G industrial routers
For networks interconnected via single-protocol industrial-grade wireless routers, the same or different protocols can be used at layers 1-2. Layer 3 uses the same routable protocol and requires the same or compatible protocols at layer 4 and beyond.
Industrial routers can perform complex routing calculations and are suitable for connecting three or more large networks with complex network topologies.
Industrial-grade routers can isolate broadcast storm information in the source network, thereby reducing and mitigating the impact of broadcast storms.
Multiprotocol industrial wireless routers can be used as network interconnection platforms using different communication protocols because they can connect to the network using different communication protocols.
The entire network router can also be used as a bridge to handle non-routable protocols.
Industrial 4G routers enable you to isolate unnecessary communications so that the interconnected network maintains its own area of independent management and control, thereby improving network security performance. Therefore, industrial-grade 4G routers are commonly used as firewalls to restrict access to the internal and external networks (Internet) of the LAN, as well as the internal areas of the LAN, and act as network masking.
It can provide reliable transport and prioritization services, and industrial LTE routers do not need to maintain a persistent connection between networks that communicate with each other.
Complete Netcom router network segmentation improves network performance and reduces host load.
Third, the advantages of 4G industrial routers
High price
When installing an industrial LTE router, it is difficult to install and maintain due to the large number of initial configurations
If you spend more time processing, the transmission performance of the entire network of the industrial router will decrease.
Unlike Bridges, routers across industrial networks are protocol-related. Each advanced protocol used for network connectivity must be configured separately, and an industrial-grade network-grade router with a separate protocol for each protocol must be provided.
Industrial Netcom routers do not support non-routed protocols, so when interconnecting multiple networks, there are restrictions on the protocols used by the connected networks.
4G Industrial Router,Sim Router Industrial,Industrial Lan Router,4G Modem Router Industrial
Shenzhen MovingComm Technology Co., Ltd. , https://www.mcrouters.com