Speaker cable as a part of the impact of sound, from the perspective of Hi-Fi high fidelity, it should be the shorter the wire, the better the sound quality.
This is like a crossover in a speaker, which is a cumbersome use. The excessively long speaker line will cause the low frequency to deteriorate due to the corresponding increase in internal resistance.
In the absence of a high-quality speaker cable, the wire must be as short as possible, and the shorter the impact on the sound, the smaller. One of the starting points for the design of many famous active speakers (such as ATC50Asl) in the world is to eliminate the influence of the speaker cable.
Some people like to "add the tone of the speaker cable to the sound", so I like to leave the speaker cable long, so as to add more speaker cable features in the system. This is an alternative gameplay. You can't completely deny this gameplay, because there are a lot of sideways to play the sound, some of which can't be explained theoretically. It may be effective in practice. For example, your system sounds sharp and bright, low and medium. Thin, then by using a long, rich speaker cable , it is possible to improve these deficiencies. This is a question of tuning skills. Therefore, it cannot be completely denied, but this is the next best policy. If your system is well balanced, if you use such a long speaker cable , the sound will be dark and faint. So no matter what, neutral, balanced, no or less rendering, is what our enthusiasts advocate. From this concept, everyone should be able to understand whether the speaker cable is as short as possible or as long as possible.
There has been such an experiment, using the same wire, made two speaker wires , one for 2.5 meters and one for 5 meters, used on the same system, the 5 meters line has obvious speed and texture degradation, high frequency extension Shrinking, the air feels a discount. But some enthusiasts feel smooth and supple. If someone likes this so-called "smooth, supple", then the length of the speaker cable is definitely an appetite.
Speaker cable as a part of the impact of sound, from the perspective of Hi-Fi high fidelity, it should be the shorter the wire, the better the sound quality.
This is like a crossover in a speaker, which is a cumbersome use. The excessively long speaker line will cause the low frequency to deteriorate due to the corresponding increase in internal resistance.
In the absence of a high-quality speaker cable, the wire must be as short as possible, and the shorter the impact on the sound, the smaller. One of the starting points for the design of many famous active speakers (such as ATC50Asl) in the world is to eliminate the influence of the speaker cable.
Some people like to "add the tone of the speaker cable to the sound", so I like to leave the speaker cable long, so as to add more speaker cable features in the system. This is an alternative gameplay. You can't completely deny this gameplay, because there are a lot of sideways to play the sound, some of which can't be explained theoretically. It may be effective in practice. For example, your system sounds sharp and bright, low and medium. Thin, then by using a long, rich speaker cable , it is possible to improve these deficiencies. This is a question of tuning skills. Therefore, it cannot be completely denied, but this is the next best policy. If your system is well balanced, if you use such a long speaker cable , the sound will be dark and faint. So no matter what, neutral, balanced, no or less rendering, is what our enthusiasts advocate. From this concept, everyone should be able to understand whether the speaker cable is as short as possible or as long as possible.
There has been such an experiment, using the same wire, made two speaker wires , one for 2.5 meters and one for 5 meters, used on the same system, the 5 meters line has obvious speed and texture degradation, high frequency extension Shrinking, the air feels a discount. But some enthusiasts feel smooth and supple. If someone likes this so-called "smooth, supple", then the length of the speaker cable is definitely an appetite.
Speaker cable as a part of the impact of sound, from the perspective of Hi-Fi high fidelity, it should be the shorter the wire, the better the sound quality.
This is like a crossover in a speaker, which is a cumbersome use. The excessively long speaker line will cause the low frequency to deteriorate due to the corresponding increase in internal resistance.
In the absence of a high-quality speaker cable, the wire must be as short as possible, and the shorter the impact on the sound, the smaller. One of the starting points for the design of many famous active speakers (such as ATC50Asl) in the world is to eliminate the influence of the speaker cable.
Some people like to "add the tone of the speaker cable to the sound", so I like to leave the speaker cable long, so as to add more speaker cable features in the system. This is an alternative gameplay. You can't completely deny this gameplay, because there are a lot of sideways to play the sound, some of which can't be explained theoretically. It may be effective in practice. For example, your system sounds sharp and bright, low and medium. Thin, then by using a long, rich speaker cable , it is possible to improve these deficiencies. This is a question of tuning skills. Therefore, it cannot be completely denied, but this is the next best policy. If your system is well balanced, if you use such a long speaker cable , the sound will be dark and faint. So no matter what, neutral, balanced, no or less rendering, is what our enthusiasts advocate. From this concept, everyone should be able to understand whether the speaker cable is as short as possible or as long as possible.
There has been such an experiment, using the same wire, made two speaker wires , one for 2.5 meters and one for 5 meters, used on the same system, the 5 meters line has obvious speed and texture degradation, high frequency extension Shrinking, the air feels a discount. But some enthusiasts feel smooth and supple. If someone likes this so-called "smooth, supple", then the length of the speaker cable is definitely an appetite.
This is like a crossover in a speaker, which is a cumbersome use. The excessively long speaker line will cause the low frequency to deteriorate due to the corresponding increase in internal resistance.
In the absence of a high-quality speaker cable, the wire must be as short as possible, and the shorter the impact on the sound, the smaller. One of the starting points for the design of many famous active speakers (such as ATC50Asl) in the world is to eliminate the influence of the speaker cable.
Some people like to "add the tone of the speaker cable to the sound", so I like to leave the speaker cable long, so as to add more speaker cable features in the system. This is an alternative gameplay. You can't completely deny this gameplay, because there are a lot of sideways to play the sound, some of which can't be explained theoretically. It may be effective in practice. For example, your system sounds sharp and bright, low and medium. Thin, then by using a long, rich speaker cable , it is possible to improve these deficiencies. This is a question of tuning skills. Therefore, it cannot be completely denied, but this is the next best policy. If your system is well balanced, if you use such a long speaker cable , the sound will be dark and faint. So no matter what, neutral, balanced, no or less rendering, is what our enthusiasts advocate. From this concept, everyone should be able to understand whether the speaker cable is as short as possible or as long as possible.
There has been such an experiment, using the same wire, made two speaker wires , one for 2.5 meters and one for 5 meters, used on the same system, the 5 meters line has obvious speed and texture degradation, high frequency extension Shrinking, the air feels a discount. But some enthusiasts feel smooth and supple. If someone likes this so-called "smooth, supple", then the length of the speaker cable is definitely an appetite.
Speaker cable as a part of the impact of sound, from the perspective of Hi-Fi high fidelity, it should be the shorter the wire, the better the sound quality.
This is like a crossover in a speaker, which is a cumbersome use. The excessively long speaker line will cause the low frequency to deteriorate due to the corresponding increase in internal resistance.
In the absence of a high-quality speaker cable, the wire must be as short as possible, and the shorter the impact on the sound, the smaller. One of the starting points for the design of many famous active speakers (such as ATC50Asl) in the world is to eliminate the influence of the speaker cable.
Some people like to "add the tone of the speaker cable to the sound", so I like to leave the speaker cable long, so as to add more speaker cable features in the system. This is an alternative gameplay. You can't completely deny this gameplay, because there are a lot of sideways to play the sound, some of which can't be explained theoretically. It may be effective in practice. For example, your system sounds sharp and bright, low and medium. Thin, then by using a long, rich speaker cable , it is possible to improve these deficiencies. This is a question of tuning skills. Therefore, it cannot be completely denied, but this is the next best policy. If your system is well balanced, if you use such a long speaker cable , the sound will be dark and faint. So no matter what, neutral, balanced, no or less rendering, is what our enthusiasts advocate. From this concept, everyone should be able to understand whether the speaker cable is as short as possible or as long as possible.
There has been such an experiment, using the same wire, made two speaker wires , one for 2.5 meters and one for 5 meters, used on the same system, the 5 meters line has obvious speed and texture degradation, high frequency extension Shrinking, the air feels a discount. But some enthusiasts feel smooth and supple. If someone likes this so-called "smooth, supple", then the length of the speaker cable is definitely an appetite.
Speaker cable as a part of the impact of sound, from the perspective of Hi-Fi high fidelity, it should be the shorter the wire, the better the sound quality.
This is like a crossover in a speaker, which is a cumbersome use. The excessively long speaker line will cause the low frequency to deteriorate due to the corresponding increase in internal resistance.
In the absence of a high-quality speaker cable, the wire must be as short as possible, and the shorter the impact on the sound, the smaller. One of the starting points for the design of many famous active speakers (such as ATC50Asl) in the world is to eliminate the influence of the speaker cable.
Some people like to "add the tone of the speaker cable to the sound", so I like to leave the speaker cable long, so as to add more speaker cable features in the system. This is an alternative gameplay. You can't completely deny this gameplay, because there are a lot of sideways to play the sound, some of which can't be explained theoretically. It may be effective in practice. For example, your system sounds sharp and bright, low and medium. Thin, then by using a long, rich speaker cable , it is possible to improve these deficiencies. This is a question of tuning skills. Therefore, it cannot be completely denied, but this is the next best policy. If your system is well balanced, if you use such a long speaker cable , the sound will be dark and faint. So no matter what, neutral, balanced, no or less rendering, is what our enthusiasts advocate. From this concept, everyone should be able to understand whether the speaker cable is as short as possible or as long as possible.
There has been such an experiment, using the same wire, made two speaker wires , one for 2.5 meters and one for 5 meters, used on the same system, the 5 meters line has obvious speed and texture degradation, high frequency extension Shrinking, the air feels a discount. But some enthusiasts feel smooth and supple. If someone likes this so-called "smooth, supple", then the length of the speaker cable is definitely an appetite.
LED T5 Lights,T5 Light Tubes,T5 LED Tube
LED Spotlight,LED Panel Light Co., Ltd. , http://www.cnledspotlight.com