LEDs light the way for planes
Date Announced: 02 Oct 2009
OSRAM and Safegate jointly develop robust and efficient LED lighting for taxiways
The ever-increasing volume of passengers and freight in global air traffic makes greater demands on safety too. Because of its major impact on passenger safety, airport operators are paying special attention to the lighting of runways for take-off, landing and taxiing. Manufacturer OSRAM and Safegate, specialist for docking guidance and lighting systems at airports, have now developed resistant and energy-efficient LEDs for taxiways.
Conditions at airports are a tough challenge for light fixtures and lamps. Systems have to be capable of with significant greatly fluctuating temperatures and vibrations and adhere to precise defined colour spectra and light distribution levels at the same time.
OSRAM and Safegate have now developed an LED module of the Zelion product family for airport applications with 2-8 LEDs in yellow, green and red, which meet all these requirements. They can be used in numerous areas, including various tarmac operations such as the Taxiway centre line, stop bar and clearance bar.
Dirk Wittenberg, Senior Product Manager (SP SSL) at OSRAM explains, "The challenge was to attach the lens securely to the circuit board despite the extreme environmental and safety conditions on the runway. Together with Safegate we have found a way to develop a robust And efficient LED solution, which meets the extremely high standards of international air transport".
The LED circuit board also enables significant energy savings: two LEDs of 3W each (green) or only 2.5W (red and yellow) replace a 40W halogen lamp. Maintenance costs can also be greatly reduced, as the life of an LED is at least The LEDs are easily dimmable and by producing coloured light via LEDs directly this makes the previous use of colour filters unnecessary. The colour spectrum of the LEDs used meets all the global standards in force. Be used internationally without restrictions.
Contact
OSRAM, Lars St???hlen
E-mail: l.
Web Site:
Date Announced: 02 Oct 2009
OSRAM and Safegate jointly develop robust and efficient LED lighting for taxiways
The ever-increasing volume of passengers and freight in global air traffic makes greater demands on safety too. Because of its major impact on passenger safety, airport operators are paying special attention to the lighting of runways for take-off, landing and taxiing. Manufacturer OSRAM and Safegate, specialist for docking guidance and lighting systems at airports, have now developed resistant and energy-efficient LEDs for taxiways.
Conditions at airports are a tough challenge for light fixtures and lamps. Systems have to be capable of with significant greatly fluctuating temperatures and vibrations and adhere to precise defined colour spectra and light distribution levels at the same time.
OSRAM and Safegate have now developed an LED module of the Zelion product family for airport applications with 2-8 LEDs in yellow, green and red, which meet all these requirements. They can be used in numerous areas, including various tarmac operations such as the Taxiway centre line, stop bar and clearance bar.
Dirk Wittenberg, Senior Product Manager (SP SSL) at OSRAM explains, "The challenge was to attach the lens securely to the circuit board despite the extreme environmental and safety conditions on the runway. Together with Safegate we have found a way to develop a robust And efficient LED solution, which meets the extremely high standards of international air transport".
The LED circuit board also enables significant energy savings: two LEDs of 3W each (green) or only 2.5W (red and yellow) replace a 40W halogen lamp. Maintenance costs can also be greatly reduced, as the life of an LED is at least The LEDs are easily dimmable and by producing coloured light via LEDs directly this makes the previous use of colour filters unnecessary. The colour spectrum of the LEDs used meets all the global standards in force. Be used internationally without restrictions.
Contact
OSRAM, Lars St???hlen
E-mail: l.
Web Site:
The insert splitter is used for the user access point in the FTTX system, which mainly completes the optical fiber end of the residential area or building, and has the functions of optical fiber fixation, stripping, fusion, jumper and shunt, etc. After the splitter, it enters the end user in the form of household optical fiber.
There are currently 1 x N and 2 x N.1 x N and 2 x N evenly inputs the optical signal from a single or double inlet into multiple outlets, or work backward to integrate multiple optical signals into a single or double fiber.
PLC Insert Splitter,Insert Splitter,PLC Optical Splitter,PLC Fiber Splitter
Chengdu Xinruixin Optical Communication Technology Co.,Ltd , http://www.xrxoptics.com