First, what is the best recording effect of MD? Is fiber-optic line recording better than analog line recording?
A: MD recording can be done in a variety of ways:
1, can be directly transcribed by MD DESK desktop (such as SONY D3, KENWOOD VH-800MD, etc., personally think that the use of desktop recording MD effect should be the best);
2, can be recorded through DISCMAN, CD player, VCD player, DVD player, etc. (using AV analog cable, fiber optic cable);
3. It can be recorded by AV analog or optical fiber output of computer sound card (such as SB LIVE sound card + fiber daughter card, Leadtek 4X SOUND sound card, etc.);
4. If you are a reporter, you can digitally record with digital MIC.
Regarding the optical fiber recording and AV analog line recording, the difference is quite obvious. The optical fiber recording is cleaner and clearer than the AV analog line recording. It can be said that there is no noise at all, and there is no need to adjust the power through the optical fiber line recording. Flat, while recording with AV analog line will be relatively small, you may need to manually adjust the recording level. Recording with fiber optic cable can fully utilize the digital recording function of the MD machine and reproduce the perfect CD sound quality.
Second, what is the sound source for the MD machine? Can I use MP3 as a sound source?
Answer: The sound source of the MD machine can be said to be very extensive (basically all the audio sources can be used as the source of the MD ). The most important thing is the CD. The MD machine itself is designed for CD digital recording. Of course, MP3 can also be used as a sound source, and the source of MP3 is also convenient. It can also save the money for purchasing CDs, but because the sound quality of MP3 itself is not good, and after transcribed MD , it is actually a little more compression, so the theoretical effect It is worse than the MP3 itself, but the sound quality (or earphone) of the MD machine itself is better than the MP3 machine, so it gives people an illusion. Therefore, I do not advocate using MP3 as the source of MD , otherwise it will be wasted. The excellent sound quality of the MD machine!
3. Does the MD need to be cleaned with a cleaning disc?
A: This is a matter of opinion! In theory, MD uses a non-contact optical head, so there is no wear (even if it is worn, it is only mechanical wear), so there is no need to clean it, but in general use, it will inevitably be dusty and what will stay in the MD machine. Therefore, the proper use of the cleaning disc can prolong the service life of the MD machine. If it is not SONY, there will be no two MD cleaning discs. It seems that cleaning is still necessary.
4. What should I do if the MD machine has a "TOC read error"?
A: The "TOC read error" is usually the MD disc is scrapped! "TOC" is equivalent to the partition table of the hard disk. It records the time, location, name and other information of the songs in the MD disc. When the MD disc is placed in the MD machine, the TOC data MD machine must be read first to correctly identify this. Zhang MD disc, if "TOC reading error" appears on the MD can not read the disc information, yet can not be re-MD disc format! That is to say, changing the disc will be scrapped! (In the four years I played MD , I only tried to scrap a million wins MD disc! So everyone is assured, MD disc is still very durable!)
5. What problems should I pay attention to when using and charging the battery of the MD machine?
Answer: MD machine, whether nickel or lithium battery, needs to be charged for more than 12 hours for the first time (it is recommended to charge more than 12 hours for the first three times), otherwise the battery life will be shortened. If it is a nickel battery, it must be Charging is only necessary after full discharge, because the nickel battery has a memory effect, and the lithium battery does not need to be so (but it is best to use it again). When the MD machine is not in use, it is best to take out the battery to prevent power failure!
6. What is the difference between different brands and models of MD discs? Is the ES disc or TDK XA PRO disc really much better?
A: As far as I am concerned, there is no difference between the dozens and 20 pieces of MD . Especially when using headphones, the biggest difference is only the style problem, but the top of the SONY ES disc, TDK XA PRO, etc. MD discs are different from ordinary MD discs, especially TDK XA PRO discs. If you are an enthusiast, your ears are especially sensitive to sound. You can even hear the difference with headphones. If you connect the amplifier, the difference is more obvious. La! The level and intensity of the top disc will be more obvious and the volume will be even louder! Although theoretically only 0, 1, 0, 1 data COPY, but the material used in the disc is also very relevant, or major manufacturers will not continue to use new materials to make MD discs!
7. What is the meaning of the round and square mouth of the fiber optic cable?
Answer: There are two types of fiber optic cable interfaces: one is a square port, which is used to connect to a large machine, such as a VCD, a DVD player, a fiber sub-card, etc., and the other is a round port, which is used to connect a DISCMAN with an optical fiber output. Generally, if you use DISCMAN to transcribe MD, you can buy two fiber optic cables (such as SONY's POC-10/-5B fiber optic cable). If you use it to connect to a DVD player or use a fiber-optic daughter card to transcribe, you need to buy a round one-headed one. The fiber optic cable (the fiber optic cable sent by the general cargo machine is one round and one round), the fiber optic cable of Leadtek is best equipped with the fiber optic cable, which is round and round, but with a rounded adapter. Therefore, both connections are universal and suitable for any fiber output device!
Eight, what is the use of DIGITAL OUT behind the optical drive?
A: If you want to get the best results, it is best to use the DIGITAL OUT output of the CD-ROM drive (the two-pin plug on the back of the CD-ROM drive). The purpose of this is to not decode the decoder through the CD-ROM itself, but directly send the signal to the DIGITAL OUT. The sound card is decoded by the sound card, because usually the decoding of the CD-ROM itself is not very good (as opposed to a good sound card, such as the innovative SB LIVE), the SB LIVE sound card is preset with the CD SPDIF_IN interface, which is used to connect The DIGITAL OUT of the optical drive, but not all optical drives have the DIGITAL OUT function, even if there is a two-pin output plug, it is not necessarily true! For details, please go to the relevant website for enquiries.
First, what is the best recording effect of MD? Is fiber-optic line recording better than analog line recording?
A: MD recording can be done in a variety of ways:
1, can be directly transcribed by MD DESK desktop (such as SONY D3, KENWOOD VH-800MD, etc., personally think that the use of desktop recording MD effect should be the best);
2, can be recorded through DISCMAN, CD player, VCD player, DVD player, etc. (using AV analog cable, fiber optic cable);
3. It can be recorded by AV analog or optical fiber output of computer sound card (such as SB LIVE sound card + fiber daughter card, Leadtek 4X SOUND sound card, etc.);
4. If you are a reporter, you can digitally record with digital MIC.
Regarding the optical fiber recording and AV analog line recording, the difference is quite obvious. The optical fiber recording is cleaner and clearer than the AV analog line recording. It can be said that there is no noise at all, and there is no need to adjust the power through the optical fiber line recording. Flat, while recording with AV analog line will be relatively small, you may need to manually adjust the recording level. Recording with fiber optic cable can fully utilize the digital recording function of the MD machine and reproduce the perfect CD sound quality.
Second, what is the sound source for the MD machine? Can I use MP3 as a sound source?
Answer: The sound source of the MD machine can be said to be very extensive (basically all the audio sources can be used as the source of the MD ). The most important thing is the CD. The MD machine itself is designed for CD digital recording. Of course, MP3 can also be used as a sound source, and the source of MP3 is also convenient. It can also save the money for purchasing CDs, but because the sound quality of MP3 itself is not good, and after transcribed MD , it is actually a little more compression, so the theoretical effect It is worse than the MP3 itself, but the sound quality (or earphone) of the MD machine itself is better than the MP3 machine, so it gives people an illusion. Therefore, I do not advocate using MP3 as the source of MD , otherwise it will be wasted. The excellent sound quality of the MD machine!
3. Does the MD need to be cleaned with a cleaning disc?
A: This is a matter of opinion! In theory, MD uses a non-contact optical head, so there is no wear (even if it is worn, it is only mechanical wear), so there is no need to clean it, but in general use, it will inevitably be dusty and what will stay in the MD machine. Therefore, the proper use of the cleaning disc can prolong the service life of the MD machine. If it is not SONY, there will be no two MD cleaning discs. It seems that cleaning is still necessary.
4. What should I do if the MD machine has a "TOC read error"?
A: The "TOC read error" is usually the MD disc is scrapped! "TOC" is equivalent to the partition table of the hard disk. It records the time, location, name and other information of the songs in the MD disc. When the MD disc is placed in the MD machine, the TOC data MD machine must be read first to correctly identify this. Zhang MD disc, if "TOC reading error" appears on the MD can not read the disc information, yet can not be re-MD disc format! That is to say, changing the disc will be scrapped! (In the four years I played MD , I only tried to scrap a million wins MD disc! So everyone is assured, MD disc is still very durable!)
5. What problems should I pay attention to when using and charging the battery of the MD machine?
Answer: MD machine, whether nickel or lithium battery, needs to be charged for more than 12 hours for the first time (it is recommended to charge more than 12 hours for the first three times), otherwise the battery life will be shortened. If it is a nickel battery, it must be Charging is only necessary after full discharge, because the nickel battery has a memory effect, and the lithium battery does not need to be so (but it is best to use it again). When the MD machine is not in use, it is best to take out the battery to prevent power failure!
6. What is the difference between different brands and models of MD discs? Is the ES disc or TDK XA PRO disc really much better?
A: As far as I am concerned, there is no difference between the dozens and 20 pieces of MD . Especially when using headphones, the biggest difference is only the style problem, but the top of the SONY ES disc, TDK XA PRO, etc. MD discs are different from ordinary MD discs, especially TDK XA PRO discs. If you are an enthusiast, your ears are especially sensitive to sound. You can even hear the difference with headphones. If you connect the amplifier, the difference is more obvious. La! The level and intensity of the top disc will be more obvious and the volume will be even louder! Although theoretically only 0, 1, 0, 1 data COPY, but the material used in the disc is also very relevant, or major manufacturers will not continue to use new materials to make MD discs!
7. What is the meaning of the round and square mouth of the fiber optic cable?
Answer: There are two types of fiber optic cable interfaces: one is a square port, which is used to connect to a large machine, such as a VCD, a DVD player, a fiber sub-card, etc., and the other is a round port, which is used to connect a DISCMAN with an optical fiber output. Generally, if you use DISCMAN to transcribe MD, you can buy two fiber optic cables (such as SONY's POC-10/-5B fiber optic cable). If you use it to connect to a DVD player or use a fiber-optic daughter card to transcribe, you need to buy a round one-headed one. The fiber optic cable (the fiber optic cable sent by the general cargo machine is one round and one round), the fiber optic cable of Leadtek is best equipped with the fiber optic cable, which is round and round, but with a rounded adapter. Therefore, both connections are universal and suitable for any fiber output device!
Eight, what is the use of DIGITAL OUT behind the optical drive?
A: If you want to get the best results, it is best to use the DIGITAL OUT output of the CD-ROM drive (the two-pin plug on the back of the CD-ROM drive). The purpose of this is to not decode the decoder through the CD-ROM itself, but directly send the signal to the DIGITAL OUT. The sound card is decoded by the sound card, because usually the decoding of the CD-ROM itself is not very good (as opposed to a good sound card, such as the innovative SB LIVE), the SB LIVE sound card is preset with the CD SPDIF_IN interface, which is used to connect The DIGITAL OUT of the optical drive, but not all optical drives have the DIGITAL OUT function, even if there is a two-pin output plug, it is not necessarily true! For details, please go to the relevant website for enquiries.
First, what is the best recording effect of MD? Is fiber-optic line recording better than analog line recording?
A: MD recording can be done in a variety of ways:
1, can be directly transcribed by MD DESK desktop (such as SONY D3, KENWOOD VH-800MD, etc., personally think that the use of desktop recording MD effect should be the best);
2, can be recorded through DISCMAN, CD player, VCD player, DVD player, etc. (using AV analog cable, fiber optic cable);
3. It can be recorded by AV analog or optical fiber output of computer sound card (such as SB LIVE sound card + fiber daughter card, Leadtek 4X SOUND sound card, etc.);
4. If you are a reporter, you can digitally record with digital MIC.
Regarding the optical fiber recording and AV analog line recording, the difference is quite obvious. The optical fiber recording is cleaner and clearer than the AV analog line recording. It can be said that there is no noise at all, and there is no need to adjust the power through the optical fiber line recording. Flat, while recording with AV analog line will be relatively small, you may need to manually adjust the recording level. Recording with fiber optic cable can fully utilize the digital recording function of the MD machine and reproduce the perfect CD sound quality.
Second, what is the sound source for the MD machine? Can I use MP3 as a sound source?
Answer: The sound source of the MD machine can be said to be very extensive (basically all the audio sources can be used as the source of the MD ). The most important thing is the CD. The MD machine itself is designed for CD digital recording. Of course, MP3 can also be used as a sound source, and the source of MP3 is also convenient. It can also save the money for purchasing CDs, but because the sound quality of MP3 itself is not good, and after transcribed MD , it is actually a little more compression, so the theoretical effect It is worse than the MP3 itself, but the sound quality (or earphone) of the MD machine itself is better than the MP3 machine, so it gives people an illusion. Therefore, I do not advocate using MP3 as the source of MD , otherwise it will be wasted. The excellent sound quality of the MD machine!
3. Does the MD need to be cleaned with a cleaning disc?
A: This is a matter of opinion! In theory, MD uses a non-contact optical head, so there is no wear (even if it is worn, it is only mechanical wear), so there is no need to clean it, but in general use, it will inevitably be dusty and what will stay in the MD machine. Therefore, the proper use of the cleaning disc can prolong the service life of the MD machine. If it is not SONY, there will be no two MD cleaning discs. It seems that cleaning is still necessary.
4. What should I do if the MD machine has a "TOC read error"?
A: The "TOC read error" is usually the MD disc is scrapped! "TOC" is equivalent to the partition table of the hard disk. It records the time, location, name and other information of the songs in the MD disc. When the MD disc is placed in the MD machine, the TOC data MD machine must be read first to correctly identify this. Zhang MD disc, if "TOC reading error" appears on the MD can not read the disc information, yet can not be re-MD disc format! That is to say, changing the disc will be scrapped! (In the four years I played MD , I only tried to scrap a million wins MD disc! So everyone is assured, MD disc is still very durable!)
5. What problems should I pay attention to when using and charging the battery of the MD machine?
Answer: MD machine, whether nickel or lithium battery, needs to be charged for more than 12 hours for the first time (it is recommended to charge more than 12 hours for the first three times), otherwise the battery life will be shortened. If it is a nickel battery, it must be Charging is only necessary after full discharge, because the nickel battery has a memory effect, and the lithium battery does not need to be so (but it is best to use it again). When the MD machine is not in use, it is best to take out the battery to prevent power failure!
6. What is the difference between different brands and models of MD discs? Is the ES disc or TDK XA PRO disc really much better?
A: As far as I am concerned, there is no difference between the dozens and 20 pieces of MD . Especially when using headphones, the biggest difference is only the style problem, but the top of the SONY ES disc, TDK XA PRO, etc. MD discs are different from ordinary MD discs, especially TDK XA PRO discs. If you are an enthusiast, your ears are especially sensitive to sound. You can even hear the difference with headphones. If you connect the amplifier, the difference is more obvious. La! The level and intensity of the top disc will be more obvious and the volume will be even louder! Although theoretically only 0, 1, 0, 1 data COPY, but the material used in the disc is also very relevant, or major manufacturers will not continue to use new materials to make MD discs!
7. What is the meaning of the round and square mouth of the fiber optic cable?
Answer: There are two types of fiber optic cable interfaces: one is a square port, which is used to connect to a large machine, such as a VCD, a DVD player, a fiber sub-card, etc., and the other is a round port, which is used to connect a DISCMAN with an optical fiber output. Generally, if you use DISCMAN to transcribe MD, you can buy two fiber optic cables (such as SONY's POC-10/-5B fiber optic cable). If you use it to connect to a DVD player or use a fiber-optic daughter card to transcribe, you need to buy a round one-headed one. The fiber optic cable (the fiber optic cable sent by the general cargo machine is one round and one round), the fiber optic cable of Leadtek is best equipped with the fiber optic cable, which is round and round, but with a rounded adapter. Therefore, both connections are universal and suitable for any fiber output device!
Eight, what is the use of DIGITAL OUT behind the optical drive?
A: If you want to get the best results, it is best to use the DIGITAL OUT output of the CD-ROM drive (the two-pin plug on the back of the CD-ROM drive). The purpose of this is to not decode the decoder through the CD-ROM itself, but directly send the signal to the DIGITAL OUT. The sound card is decoded by the sound card, because usually the decoding of the CD-ROM itself is not very good (as opposed to a good sound card, such as the innovative SB LIVE), the SB LIVE sound card is preset with the CD SPDIF_IN interface, which is used to connect The DIGITAL OUT of the optical drive, but not all optical drives have the DIGITAL OUT function, even if there is a two-pin output plug, it is not necessarily true! For details, please go to the relevant website for enquiries.
A: MD recording can be done in a variety of ways:
1, can be directly transcribed by MD DESK desktop (such as SONY D3, KENWOOD VH-800MD, etc., personally think that the use of desktop recording MD effect should be the best);
2, can be recorded through DISCMAN, CD player, VCD player, DVD player, etc. (using AV analog cable, fiber optic cable);
3. It can be recorded by AV analog or optical fiber output of computer sound card (such as SB LIVE sound card + fiber daughter card, Leadtek 4X SOUND sound card, etc.);
4. If you are a reporter, you can digitally record with digital MIC.
Regarding the optical fiber recording and AV analog line recording, the difference is quite obvious. The optical fiber recording is cleaner and clearer than the AV analog line recording. It can be said that there is no noise at all, and there is no need to adjust the power through the optical fiber line recording. Flat, while recording with AV analog line will be relatively small, you may need to manually adjust the recording level. Recording with fiber optic cable can fully utilize the digital recording function of the MD machine and reproduce the perfect CD sound quality.
Second, what is the sound source for the MD machine? Can I use MP3 as a sound source?
Answer: The sound source of the MD machine can be said to be very extensive (basically all the audio sources can be used as the source of the MD ). The most important thing is the CD. The MD machine itself is designed for CD digital recording. Of course, MP3 can also be used as a sound source, and the source of MP3 is also convenient. It can also save the money for purchasing CDs, but because the sound quality of MP3 itself is not good, and after transcribed MD , it is actually a little more compression, so the theoretical effect It is worse than the MP3 itself, but the sound quality (or earphone) of the MD machine itself is better than the MP3 machine, so it gives people an illusion. Therefore, I do not advocate using MP3 as the source of MD , otherwise it will be wasted. The excellent sound quality of the MD machine!
3. Does the MD need to be cleaned with a cleaning disc?
A: This is a matter of opinion! In theory, MD uses a non-contact optical head, so there is no wear (even if it is worn, it is only mechanical wear), so there is no need to clean it, but in general use, it will inevitably be dusty and what will stay in the MD machine. Therefore, the proper use of the cleaning disc can prolong the service life of the MD machine. If it is not SONY, there will be no two MD cleaning discs. It seems that cleaning is still necessary.
4. What should I do if the MD machine has a "TOC read error"?
A: The "TOC read error" is usually the MD disc is scrapped! "TOC" is equivalent to the partition table of the hard disk. It records the time, location, name and other information of the songs in the MD disc. When the MD disc is placed in the MD machine, the TOC data MD machine must be read first to correctly identify this. Zhang MD disc, if "TOC reading error" appears on the MD can not read the disc information, yet can not be re-MD disc format! That is to say, changing the disc will be scrapped! (In the four years I played MD , I only tried to scrap a million wins MD disc! So everyone is assured, MD disc is still very durable!)
5. What problems should I pay attention to when using and charging the battery of the MD machine?
Answer: MD machine, whether nickel or lithium battery, needs to be charged for more than 12 hours for the first time (it is recommended to charge more than 12 hours for the first three times), otherwise the battery life will be shortened. If it is a nickel battery, it must be Charging is only necessary after full discharge, because the nickel battery has a memory effect, and the lithium battery does not need to be so (but it is best to use it again). When the MD machine is not in use, it is best to take out the battery to prevent power failure!
6. What is the difference between different brands and models of MD discs? Is the ES disc or TDK XA PRO disc really much better?
A: As far as I am concerned, there is no difference between the dozens and 20 pieces of MD . Especially when using headphones, the biggest difference is only the style problem, but the top of the SONY ES disc, TDK XA PRO, etc. MD discs are different from ordinary MD discs, especially TDK XA PRO discs. If you are an enthusiast, your ears are especially sensitive to sound. You can even hear the difference with headphones. If you connect the amplifier, the difference is more obvious. La! The level and intensity of the top disc will be more obvious and the volume will be even louder! Although theoretically only 0, 1, 0, 1 data COPY, but the material used in the disc is also very relevant, or major manufacturers will not continue to use new materials to make MD discs!
7. What is the meaning of the round and square mouth of the fiber optic cable?
Answer: There are two types of fiber optic cable interfaces: one is a square port, which is used to connect to a large machine, such as a VCD, a DVD player, a fiber sub-card, etc., and the other is a round port, which is used to connect a DISCMAN with an optical fiber output. Generally, if you use DISCMAN to transcribe MD, you can buy two fiber optic cables (such as SONY's POC-10/-5B fiber optic cable). If you use it to connect to a DVD player or use a fiber-optic daughter card to transcribe, you need to buy a round one-headed one. The fiber optic cable (the fiber optic cable sent by the general cargo machine is one round and one round), the fiber optic cable of Leadtek is best equipped with the fiber optic cable, which is round and round, but with a rounded adapter. Therefore, both connections are universal and suitable for any fiber output device!
Eight, what is the use of DIGITAL OUT behind the optical drive?
A: If you want to get the best results, it is best to use the DIGITAL OUT output of the CD-ROM drive (the two-pin plug on the back of the CD-ROM drive). The purpose of this is to not decode the decoder through the CD-ROM itself, but directly send the signal to the DIGITAL OUT. The sound card is decoded by the sound card, because usually the decoding of the CD-ROM itself is not very good (as opposed to a good sound card, such as the innovative SB LIVE), the SB LIVE sound card is preset with the CD SPDIF_IN interface, which is used to connect The DIGITAL OUT of the optical drive, but not all optical drives have the DIGITAL OUT function, even if there is a two-pin output plug, it is not necessarily true! For details, please go to the relevant website for enquiries.
First, what is the best recording effect of MD? Is fiber-optic line recording better than analog line recording?
A: MD recording can be done in a variety of ways:
1, can be directly transcribed by MD DESK desktop (such as SONY D3, KENWOOD VH-800MD, etc., personally think that the use of desktop recording MD effect should be the best);
2, can be recorded through DISCMAN, CD player, VCD player, DVD player, etc. (using AV analog cable, fiber optic cable);
3. It can be recorded by AV analog or optical fiber output of computer sound card (such as SB LIVE sound card + fiber daughter card, Leadtek 4X SOUND sound card, etc.);
4. If you are a reporter, you can digitally record with digital MIC.
Regarding the optical fiber recording and AV analog line recording, the difference is quite obvious. The optical fiber recording is cleaner and clearer than the AV analog line recording. It can be said that there is no noise at all, and there is no need to adjust the power through the optical fiber line recording. Flat, while recording with AV analog line will be relatively small, you may need to manually adjust the recording level. Recording with fiber optic cable can fully utilize the digital recording function of the MD machine and reproduce the perfect CD sound quality.
Second, what is the sound source for the MD machine? Can I use MP3 as a sound source?
Answer: The sound source of the MD machine can be said to be very extensive (basically all the audio sources can be used as the source of the MD ). The most important thing is the CD. The MD machine itself is designed for CD digital recording. Of course, MP3 can also be used as a sound source, and the source of MP3 is also convenient. It can also save the money for purchasing CDs, but because the sound quality of MP3 itself is not good, and after transcribed MD , it is actually a little more compression, so the theoretical effect It is worse than the MP3 itself, but the sound quality (or earphone) of the MD machine itself is better than the MP3 machine, so it gives people an illusion. Therefore, I do not advocate using MP3 as the source of MD , otherwise it will be wasted. The excellent sound quality of the MD machine!
3. Does the MD need to be cleaned with a cleaning disc?
A: This is a matter of opinion! In theory, MD uses a non-contact optical head, so there is no wear (even if it is worn, it is only mechanical wear), so there is no need to clean it, but in general use, it will inevitably be dusty and what will stay in the MD machine. Therefore, the proper use of the cleaning disc can prolong the service life of the MD machine. If it is not SONY, there will be no two MD cleaning discs. It seems that cleaning is still necessary.
4. What should I do if the MD machine has a "TOC read error"?
A: The "TOC read error" is usually the MD disc is scrapped! "TOC" is equivalent to the partition table of the hard disk. It records the time, location, name and other information of the songs in the MD disc. When the MD disc is placed in the MD machine, the TOC data MD machine must be read first to correctly identify this. Zhang MD disc, if "TOC reading error" appears on the MD can not read the disc information, yet can not be re-MD disc format! That is to say, changing the disc will be scrapped! (In the four years I played MD , I only tried to scrap a million wins MD disc! So everyone is assured, MD disc is still very durable!)
5. What problems should I pay attention to when using and charging the battery of the MD machine?
Answer: MD machine, whether nickel or lithium battery, needs to be charged for more than 12 hours for the first time (it is recommended to charge more than 12 hours for the first three times), otherwise the battery life will be shortened. If it is a nickel battery, it must be Charging is only necessary after full discharge, because the nickel battery has a memory effect, and the lithium battery does not need to be so (but it is best to use it again). When the MD machine is not in use, it is best to take out the battery to prevent power failure!
6. What is the difference between different brands and models of MD discs? Is the ES disc or TDK XA PRO disc really much better?
A: As far as I am concerned, there is no difference between the dozens and 20 pieces of MD . Especially when using headphones, the biggest difference is only the style problem, but the top of the SONY ES disc, TDK XA PRO, etc. MD discs are different from ordinary MD discs, especially TDK XA PRO discs. If you are an enthusiast, your ears are especially sensitive to sound. You can even hear the difference with headphones. If you connect the amplifier, the difference is more obvious. La! The level and intensity of the top disc will be more obvious and the volume will be even louder! Although theoretically only 0, 1, 0, 1 data COPY, but the material used in the disc is also very relevant, or major manufacturers will not continue to use new materials to make MD discs!
7. What is the meaning of the round and square mouth of the fiber optic cable?
Answer: There are two types of fiber optic cable interfaces: one is a square port, which is used to connect to a large machine, such as a VCD, a DVD player, a fiber sub-card, etc., and the other is a round port, which is used to connect a DISCMAN with an optical fiber output. Generally, if you use DISCMAN to transcribe MD, you can buy two fiber optic cables (such as SONY's POC-10/-5B fiber optic cable). If you use it to connect to a DVD player or use a fiber-optic daughter card to transcribe, you need to buy a round one-headed one. The fiber optic cable (the fiber optic cable sent by the general cargo machine is one round and one round), the fiber optic cable of Leadtek is best equipped with the fiber optic cable, which is round and round, but with a rounded adapter. Therefore, both connections are universal and suitable for any fiber output device!
Eight, what is the use of DIGITAL OUT behind the optical drive?
A: If you want to get the best results, it is best to use the DIGITAL OUT output of the CD-ROM drive (the two-pin plug on the back of the CD-ROM drive). The purpose of this is to not decode the decoder through the CD-ROM itself, but directly send the signal to the DIGITAL OUT. The sound card is decoded by the sound card, because usually the decoding of the CD-ROM itself is not very good (as opposed to a good sound card, such as the innovative SB LIVE), the SB LIVE sound card is preset with the CD SPDIF_IN interface, which is used to connect The DIGITAL OUT of the optical drive, but not all optical drives have the DIGITAL OUT function, even if there is a two-pin output plug, it is not necessarily true! For details, please go to the relevant website for enquiries.
First, what is the best recording effect of MD? Is fiber-optic line recording better than analog line recording?
A: MD recording can be done in a variety of ways:
1, can be directly transcribed by MD DESK desktop (such as SONY D3, KENWOOD VH-800MD, etc., personally think that the use of desktop recording MD effect should be the best);
2, can be recorded through DISCMAN, CD player, VCD player, DVD player, etc. (using AV analog cable, fiber optic cable);
3. It can be recorded by AV analog or optical fiber output of computer sound card (such as SB LIVE sound card + fiber daughter card, Leadtek 4X SOUND sound card, etc.);
4. If you are a reporter, you can digitally record with digital MIC.
Regarding the optical fiber recording and AV analog line recording, the difference is quite obvious. The optical fiber recording is cleaner and clearer than the AV analog line recording. It can be said that there is no noise at all, and there is no need to adjust the power through the optical fiber line recording. Flat, while recording with AV analog line will be relatively small, you may need to manually adjust the recording level. Recording with fiber optic cable can fully utilize the digital recording function of the MD machine and reproduce the perfect CD sound quality.
Second, what is the sound source for the MD machine? Can I use MP3 as a sound source?
Answer: The sound source of the MD machine can be said to be very extensive (basically all the audio sources can be used as the source of the MD ). The most important thing is the CD. The MD machine itself is designed for CD digital recording. Of course, MP3 can also be used as a sound source, and the source of MP3 is also convenient. It can also save the money for purchasing CDs, but because the sound quality of MP3 itself is not good, and after transcribed MD , it is actually a little more compression, so the theoretical effect It is worse than the MP3 itself, but the sound quality (or earphone) of the MD machine itself is better than the MP3 machine, so it gives people an illusion. Therefore, I do not advocate using MP3 as the source of MD , otherwise it will be wasted. The excellent sound quality of the MD machine!
3. Does the MD need to be cleaned with a cleaning disc?
A: This is a matter of opinion! In theory, MD uses a non-contact optical head, so there is no wear (even if it is worn, it is only mechanical wear), so there is no need to clean it, but in general use, it will inevitably be dusty and what will stay in the MD machine. Therefore, the proper use of the cleaning disc can prolong the service life of the MD machine. If it is not SONY, there will be no two MD cleaning discs. It seems that cleaning is still necessary.
4. What should I do if the MD machine has a "TOC read error"?
A: The "TOC read error" is usually the MD disc is scrapped! "TOC" is equivalent to the partition table of the hard disk. It records the time, location, name and other information of the songs in the MD disc. When the MD disc is placed in the MD machine, the TOC data MD machine must be read first to correctly identify this. Zhang MD disc, if "TOC reading error" appears on the MD can not read the disc information, yet can not be re-MD disc format! That is to say, changing the disc will be scrapped! (In the four years I played MD , I only tried to scrap a million wins MD disc! So everyone is assured, MD disc is still very durable!)
5. What problems should I pay attention to when using and charging the battery of the MD machine?
Answer: MD machine, whether nickel or lithium battery, needs to be charged for more than 12 hours for the first time (it is recommended to charge more than 12 hours for the first three times), otherwise the battery life will be shortened. If it is a nickel battery, it must be Charging is only necessary after full discharge, because the nickel battery has a memory effect, and the lithium battery does not need to be so (but it is best to use it again). When the MD machine is not in use, it is best to take out the battery to prevent power failure!
6. What is the difference between different brands and models of MD discs? Is the ES disc or TDK XA PRO disc really much better?
A: As far as I am concerned, there is no difference between the dozens and 20 pieces of MD . Especially when using headphones, the biggest difference is only the style problem, but the top of the SONY ES disc, TDK XA PRO, etc. MD discs are different from ordinary MD discs, especially TDK XA PRO discs. If you are an enthusiast, your ears are especially sensitive to sound. You can even hear the difference with headphones. If you connect the amplifier, the difference is more obvious. La! The level and intensity of the top disc will be more obvious and the volume will be even louder! Although theoretically only 0, 1, 0, 1 data COPY, but the material used in the disc is also very relevant, or major manufacturers will not continue to use new materials to make MD discs!
7. What is the meaning of the round and square mouth of the fiber optic cable?
Answer: There are two types of fiber optic cable interfaces: one is a square port, which is used to connect to a large machine, such as a VCD, a DVD player, a fiber sub-card, etc., and the other is a round port, which is used to connect a DISCMAN with an optical fiber output. Generally, if you use DISCMAN to transcribe MD, you can buy two fiber optic cables (such as SONY's POC-10/-5B fiber optic cable). If you use it to connect to a DVD player or use a fiber-optic daughter card to transcribe, you need to buy a round one-headed one. The fiber optic cable (the fiber optic cable sent by the general cargo machine is one round and one round), the fiber optic cable of Leadtek is best equipped with the fiber optic cable, which is round and round, but with a rounded adapter. Therefore, both connections are universal and suitable for any fiber output device!
Eight, what is the use of DIGITAL OUT behind the optical drive?
A: If you want to get the best results, it is best to use the DIGITAL OUT output of the CD-ROM drive (the two-pin plug on the back of the CD-ROM drive). The purpose of this is to not decode the decoder through the CD-ROM itself, but directly send the signal to the DIGITAL OUT. The sound card is decoded by the sound card, because usually the decoding of the CD-ROM itself is not very good (as opposed to a good sound card, such as the innovative SB LIVE), the SB LIVE sound card is preset with the CD SPDIF_IN interface, which is used to connect The DIGITAL OUT of the optical drive, but not all optical drives have the DIGITAL OUT function, even if there is a two-pin output plug, it is not necessarily true! For details, please go to the relevant website for enquiries.
PVC Tile,PVC Marble,Flooring Tile
Hand Tools Co., Ltd , http://www.nshandtools.com