The difference between air conditioning socket and ordinary socket

The air conditioner is a motor type product, and the motor product has a starting current, and the starting current can be up to three times the peak current. Therefore, the rated current of the air conditioning socket is generally 16 amps, 20 amps, 25 amps, 32 amps, and the like. The air-conditioning socket has a large shape, large hole spacing and high rated power. Because the starting current is large, and therefore the distance between the holes of the socket is larger than the ordinary one, and the rated current must be greater than 16A, and the rated current of the ordinary socket is 10A, the air-conditioning socket is thicker than the ordinary socket and the jack is large.

Air conditioning socket

1. The socket panel is provided with an air conditioner dedicated jack, an infrared receiver and a power supply indicator.

2, the socket usually does not supply power (that is, "normally no power" state), high security.

3. When using, the air conditioner main unit plug is inserted into the socket. At this time, the air conditioner remote control is used to activate the socket, the panel light tube is bright, the socket starts to supply power, and the air conditioner remote controller is pressed again, and the air conditioner starts to work.

4. After the socket starts to supply power, if the air conditioner does not start working, the socket power supply will automatically power off after about 180 seconds, and the socket will return to the normal powerless state.

5. After the socket starts to supply power, the air conditioner starts to work, and the socket continues to supply power. The outlet is automatically powered off until the air conditioner is turned off.

6. The socket is a special socket specially designed for air conditioner. The air conditioner does not work, the socket will not supply power, and the socket will continue to supply power only when the air conditioner starts working. Thereby solving the problem of "standby power consumption" of the air conditioner, saving electricity consumption.

Ordinary socket

One or more circuit wiring can be inserted into the socket, through which various wirings can be inserted for easy connection with other circuits. Through the connection and disconnection between the line and the copper member, the circuit is finally turned on and off.

Air conditioning socket installation height

1. The installation height of the wall-mounted air conditioner socket is generally not less than 2.0 meters, which is below the air conditioner.

2. It is recommended to buy an air conditioner socket with a switch so that the power of the outlet can be cut off without pulling the plug.

3. Do not install the socket near the water source. If it is installed on an open balcony, please use the special splash cover for the switch socket.