Electrician's safety common sense - Solutions - Huaqiang Electronic Network

Probe domestic switch needle KG-300K needle head diameter is 3.0mm normally open switch needle

Factory direct sales - solid capacitor - patch aluminum electrolysis, to ensure that the factory first-class goods!

1. The electrical operators strictly implement the electrical safety operation procedures, and the electrical equipment tools should be regularly inspected and tested. Any unqualified electrical equipment and tools should be stopped.
2. Electricians are strictly forbidden to operate with electricity. It is forbidden to carry load wiring on the line and use electrical appliances correctly.
3. The metal casing of electrical equipment must be grounded or zero-protected. A leakage protector must be installed in the main box and switch box to implement two-stage leakage protection.
4. The fuse used in electrical equipment is forbidden to be replaced by its wire and needs to match the capacity of the equipment.
5. It is strictly forbidden to use plastic wire in the construction site. The type and section of the insulated wire used must conform to the design of the power supply.
6, the electrician must be certified to work, must wear a variety of insulation protective equipment during operation, not illegal operation.
7. When an electrical fire occurs, immediately cut off the power supply, use dry sand to extinguish the fire or use dry powder to extinguish the fire. Do not use conductive fire extinguishing agent to extinguish the fire.
8. For mobile lighting, a safe voltage must be used.
9. Temporary power construction at the construction site must comply with the construction organization design and safety operation procedures.