Linear Technology Introduces Synchronous DC/DC Controller with High-Frequency Control On-Time

Photocoupler

Linear Technology Corporation introduced the LTC3833, a high-frequency synchronous DC/DC controller featuring an adjustable on-time and clock synchronization. This device utilizes a valley current mode architecture to deliver a fast transient response by increasing the operating frequency during load changes. As a result, it can quickly recover from large load steps in just a few cycles. The LTC3833 operates over a wide input voltage range of 4.5V to 38V, making it suitable for various intermediate bus applications.

The powerful built-in N-channel MOSFET gate drivers allow the use of high-power external MOSFETs, enabling output currents up to 25A with output voltages ranging from 0.6V to 5.5V. This makes the LTC3833 ideal for point-of-load power supply designs where efficiency and performance are critical. Its differential amplifier provides accurate remote sensing of both positive and negative output terminals, eliminating the impact of trace resistance, vias, and interconnect IR drops (up to ±500mV), ensuring precise regulation.

The LTC3833 supports a minimum on-time of 20ns, which is essential for high step-down ratio power supplies operating at high frequencies. The switching frequency can be set between 200kHz and 2MHz or synchronized with an external clock source. To monitor output current, users can either measure the voltage drop across the output inductor (DCR) for maximum efficiency or use a sense resistor for more precise control. Additional features include an internal bias LDO, soft start and tracking capabilities, and an adjustable current limit, making the LTC3833 a versatile solution for demanding power management applications.

Gantry Structures

In industrial Settings, gantry structures are often used to support overhead cranes, conveyors, and other equipment. These structures are typically made of steel and are designed to withstand heavy loads and harsh environmental conditions. Gantry structures can be fixed or mobile, and mobile gantry structures are often used for applications that require moving equipment to different locations within a facility.

Gantry Structures,Steel Post Structures,Stainless Steel Structures,Gantry Steel Structures

JIANGSU HONGGUANG STEEL POLE CO., LTD. , https://www.hgsteelpoles.com