Mouser stocking Texas Instruments DC/DC LED Lighting Development Kit

Posted on

Mouser Electronics has announced the availability of the Texas InstrumentsTM DSDCDCLEDKIT TMS320C2000TM DC/DC LED Lighting Development Kit.

The Texas InstrumentsTM DSDCDCLEDKIT TMS320C2000TM DC/DC LED Lighting Development Kit includes all the hardware and software needed to start and develop a digitally controlled LED DC/DC system. TI TMDSDCDCLEDKIT implements its functionality based on Piccolo microcontrollers and the controlCARD development platform. The Piccolo MCU can directly control the DC/DC power stage and can also control eight LED strings. The TI LED Lighting Kit includes a development board with a 12-48 VDC voltage input and a SEPIC DC/DC topology to reduce or increase the input voltage to the required size. This voltage is used to supply four sets of LED drive levels, each of which can drive two LED strings, each with a power of 30 watts. TI TMDSDCDCLEDKIT includes closed-loop open source software for DC/DC power stages and LED lighting levels. The kit hardware is also completely open source, and all gerber files, drawings and bills of materials are available for free.

3Mm Green Through-Hole Led(DIP LED) manufacturer from China.


We supply kinds of 3mm Through-hole LED with different wavelength from 365nm to 1550nm, which include the visible LED and the invisible LED.
In this catalog, we mainly introduce the 3Mm Green Through-Hole LED.
3mm green led
3mm Through-hole LED, we supply 3mm Green LED with water clear lens, 3mm Green LED with Green clear lens and 3mm Green LED with Green diffused lens, 3mm round green LED without flange(fringe). We also supply 4mm Green LED with water clear lens, 4mm Green LED with Green clear lens and 4mm Green LED with Green diffused lens.

3mm Green Through-Hole LED widely used for indicator LED, die hole LED and 3mm round Green with lamp holder because of the high brightness and the small size.

For the pin of 3mm Green Through-Hole LED, we also have a lots of choice on it. For example: 3mm Green Through-hole LED flat pin, 3mm Green Through-Hole Led curved pin, 3mm Green Through-hole LED braided pin ect.

For the bringhtness of 3mm Green through-hole LED, we have three level: common bright 3mm Green through-hole LED, super bright 3mm Green through-hole LED and ultra bright 3mm Green through-hole LED.

For the angle of 3mm Green through-hole LED, 15 degrees, 30 degrees, 45 degrees, 60 degrees, 120 degrees are available.

For the raw materials, we use the LED chip from Taiwan Epistar, Tyntek, Optotech. The stability of our products have been recognized by all of our custom.


All of our product are meet with Reach, CE, RoSH, SGS, EN62471 standards and have 5 years warranty.


3mm Green Through-Hole LED

3Mm Green Through-Hole Led,Green Through-Hole Led,3Mm Through-Hole Led Oval Green,Through-Hole Led Oval Green

Shenzhen Best LED Opto-electronic Co.,Ltd , http://www.bestsmd.com