Building door and window airtight field test equipment installation method and instructions for use - Database & Sql Blog Articles

Kaixin micro test

Test - lowercase jpg

Test probe PH-5H

SYL-18

Type building door and window airtight field test equipment

one,

Building door and window airtight field test equipment

in accordance with

JG/T211-2007

"On-site inspection method for airtight, watertight and wind pressure resistance of building exterior windows"

GB/-T7106

,

7

,

8

standard. Developed a new portable door and window field detector. Use the manual knob to adjust the air pressure, display the instrument cycle detection and display air pressure, air flow, deformation displacement and so on. The wind source and control adjustment system are integrated into a suitcase, which is small in size, light in weight, easy to carry, reliable and durable, and easy to use.

Second, the installation method

Put the base into the box, fix the sleeve, sample holder, etc. as shown in the figure. Place the burner in front of the specimen. The burner rod is screwed from the outer casing of the casing to the burner base. Connect the propane meter to the liquefied gas tank, connect the regulating valve to the other end of the propane meter with a plastic tube, and connect the regulating valve to the burner with a pneumatic tube.

Third, the instructions for use

1

Use a suitable ignition positioner and place it on top of the burner.

2

Place the sample in the sample holder and hang it.

3

After the burner is close to the sample, the ruler on the bottom plate is locked and positioned.

4

Place the filter paper in a collection tray made of aluminum foil and place it under the test piece.

5

Raise the burner, open the pressure regulating valve knob, ignite the nozzle with an electronic igniter, and gradually adjust the flame length to

20mm

45