The effect of laser cutting parameters on slit width The thickness of the material remains unchanged. Under different conditions of cutting speed or laser power, the effect of laser power on slit width is investigated. The relationship between the cutting speed, the slit width and the laser power. Under the same cutting speed, with the increase of the laser power value, the slit width also showed a linear increase trend; under different laser powers, with the increase of the cutting speed, the slit width narrowed accordingly.
The relationship between the thickness of the quartz material and the width of the slit. The relationship between the thickness of the slit and the thickness of the material is the relationship between the thickness of the material, the power of the laser, and the width of the slit. The relationship between material thickness, cutting speed and slit width. At a certain laser power, as the thickness of the material increases, the slit width becomes narrower. For thinner workpieces, a smaller laser power should be selected; if the laser power value is too large, it will inevitably cause the slit to be too wide, which will affect the surface quality of the cutting surface, such as cracks and scorching on the cutting surface.
For thicker workpieces, the effect of laser power on the slit width is not very significant, and a suitably large power can be selected to obtain a higher cutting speed. At this time, if the laser power is too small, the material will not be cut. For the same laser power, the thicker the material, the narrower the slit; the thinner the material, the wider the slit. The slit width will decrease exponentially as the thickness of the material increases. When the slit width is smaller than the laser beam spot diameter, the workpiece cannot actually be cut. At this time, the power of the laser should be increased to achieve the purpose of cutting.
Technical Data of DC RFI Filter
Rated current of DC EMI Filter: 0.5A~2000A
Working voltage: 0~250VDC
Various connection types: wire, solder lug, stud
Custom specific versions on request
Features of DC Line Filter
High performance DC filters with exceptional common and differential mode filtering effectfor interference from 10KHz to 30MHz.
FT1200D series are two-stage filters comprising one common mode and one differential mode with enhanced filtering effect of the differential mode interference.FT121D series are two-stage common mode filters
High voltage versions above 250VDC are also available upon request.
Suitable for switch power supply, SPC exchange and other DC electric device.
DC EMI Filter
DC EMI Filter,DC RFI Filter,DC Line Filter,DC Noise Filter
Jinan Filtemc Electronic Equipment Co., Ltd. , https://www.chinaemifilter.com