I. Introduction
Second, unpacking & disassembling
1, drying a sun
2, split
Third, the portable problem
Fourth, use & programming settings
1, connect the type-c device
2, ordinary USB computer
V. Summary
I have been using the Thinkpad notebook computer. Now the laptop has been made thinner, and the keyboard has been improved several times. For example, the chocolate keyboards of my X230 and T530 are used, but they are used at home or in the company. At the time, because of the external display's sake, it will still be equipped with a separate keyboard, before buying several, but all are wireless keyboards, 2.4G or Bluetooth keyboard, but the mechanical keyboard is really not used. In 2016, I saw too many mechanical keyboards and discussions in Auntie. So at the end of the year, I took a piece of Cherry G80's red-axis mechanical keyboard. It was the first time I had a close contact with a mechanical keyboard. It is actually better than current ordinary membrane keyboards, especially when codewords are used.
Before I bought that cherry mechanical keyboard, I also did a lot of homework. Many netizens recommended more than 104 keys. Because there are independent number keys, when the number is entered, it will be relatively cool, so I bought this one. However, it was later discovered that this keyboard with almost complete keys has its disadvantages: The land area is too large (the average price of magic is now 50,000 yuan/m2. This cherry covers an area of ​​about 0.07 square meters, which is 3500 oceans. Joke!), I'm not rich desktop, so although I have been using the mechanical keyboard of the Cherry G80, but I think it is not too easy, when you want to tea when the East and special tea, and then a handful of IKBC 61-key pocket try (Online and Auntie IKBC's reputation is still good, they say that cost-effective.)
Really did not expect ah, aunt so awesome, have the opportunity to evaluate this new version of poker2 mini mechanical keyboard.
I was surprised when I received it. The packaging was small, but it was not light weight.
Family portrait: keyboard, USB to type-c data cable, type-c to type-c data cable (two data lines, conscience!), remover and color keys, and a manual.
First show the accessories, and the keyboard puts the details behind.
Shift, Alt, Control provide three color buttons, I immediately replaced it.
Changed friends know that this is actually very simple, as shown in the figure below, hook up the diagonal upwards on it.
The long key shift has no problem, but the longest space key does not work.
After the change, it is like this, red, blue, green, and a little "a little red in a million flowers" feeling.
This time I received the "tea axe." According to the previous homework before buying a mechanical keyboard, it is generally said that the axis of the tea tends to be "typing". I still have a lot of work typing. I bought the red axis in front of me because there are comments from users. The meaning of "universal axis" is just to try the tea axis here.
The basic routine of the keyboard evaluation is as follows. The first letter of the aunt (SMZDM) + own English (Thaiyee, according to the “Taiyi†sound), there are no two M and two E, the former is inverted with W, the latter With 3 reverses, it's really witty.
The opposite side of the keyboard can be routed and left or right. This may be one of the reasons for using the type-c interface. It does not need to care about the direction of the insertion. Followed by "dial switch" used to quickly adjust the layout of the keyboard. In addition, the metal nameplate appears a bit tall, not a silver plastic sticker.
The keyboard alignment is as shown in the figure below. You can use both left and right. However, this slot cannot hold the line card tight. If the keyboard is moved, the cable can easily come off.
Comparing with the Microsoft All in one keyboard at home, the Cherry mechanical keyboard company did not take home and it had already received an annual holiday.
The following is the shot taken by the company after the start of construction. It is much smaller and the floor area is not so big.
The cherry I bought before was selected as the "low-key cap". I was afraid that the "high-key cap" would take a long time to type, but the Pocker2 I reviewed was a high-key cap. I didn't use it in my imagination. .
Afterwards, the scene on the desk is like this.
Do not remove the uncomfortable structure is probably me like this, check the information before the demolition, there are pictures to find the first generation of dismantling the poker, but in order to prevent omissions, I still pull out the keycap. In fact, it is not necessary. There are a total of 6 screws. The nearby keycaps can be removed. Special attention, this screw can not afford to toss, the cross should not slip.
Why this keyboard component is not light, because the use of steel plate, as shown below, that "magnet" is actually a hollow cup motor, because of the small, I suck the screwdriver to facilitate the screw unloading. The suction is good on the steel plate, this plate is still relatively thick, and the red part below is the circuit board.
Solid material is unquestionable, but this brings difficulty to portability.
On the portable issue, this is a bit embarrassing, the net weight of the keyboard is more than 1 pound, reaching 598.5g, plus the data line 641.5g, if you carry with your company to work, if you use it after work, the burden is a little big!
In addition, I had to use a keyboard pack. I also went to the Majia Army to find an EVA box. This is similar to putting a headset. The result is not a suitable size. The next two, white is too short and black is too wide. The ideal is that this white length can be increased to 30CM, unfortunately.
However, this component of the commuter belt is indeed heavy.
Now the computer supporting the type-c interface has been quite a few, but my computer is still old, so there is no such interface, there is this interface is the millet 5 mobile phone, so try it, hey, let alone use .
Plug in immediately recognize
When entering the short message needs to be edited, it will also remind that the virtual keyboard will not appear at this time, and typing directly via the keyboard can be used.
"What in life is worth buying" 
PS: Xiaomi 5's type-c data can also be used on the keyboard.
“If a worker wants to do something good, he must first sharpen his tools.†Everyone’s habits are different. When using a new product, it’s just a little unaccustomed to start a new product, especially some products that are streamlined to small and powerful. For example, when I first started with the Logitech G500s, there are so many function keys. The default is not always used by myself, so the first thing is to set the function keys according to your own habits. This ikbc Poker2 mini keyboard is no exception.
There are 4 layers for Poker2: default (blank light off), Layer1 (blank light red), Layer2 (blank light green), Layer1 (blank light blue), switch with the key combination (Fn + right Shift), which is the basis of programming, First, the programming instructions on the instructions, and then the actual combat. Scanning, I do not know if you can see clearly
Talk about the dial switch, the instructions on the description is more clear, behind the "dial switch" is 6, the combination of more, switches 1 and 2 have been combined with four keyboard arrangement mode, both of which are off our state Familiar Qwerty mode, in addition to Dvorak, Colemak and Workman layout, but the latter three are purely in pursuit of higher input efficiency and prevent finger "fight" designed, most of them are not available, including myself , so I still default switch 1 and 2 off.
Switch 3, this is to change the position of Fn and Pn (the default layer can not be changed), this is what I use, just when I use the up, down, left, and right buttons in the code, but by default, I need to press fn+ASDW first. Fon, the fn key requires the right hand to hold it alone, some troubles, and I often do not use Caps key often mistakenly touch, so I would like to change fn and Caps, refer to the instructions on the A and Fn interchange steps, My steps are as follows:
1) Select Layer1 (Fn+ Right Shift, Space Left Light Red)
2) Open DIP switch 3
3) Press Fn and select a location other than Caps, such as a
4) Complete the change after turning off DIP switch 3
5) According to the above programming instructions, change the Fn (in this case the win key function) to the Caps key:
a, select Layer1 (Fn + right Shift, space left light red), press Fn (at this time has to a key on) + right Control, enter the programming mode, then the space right light becomes blue light;
b, first press Fn key, then press Caps key, this time is the space right light flashes red, then press Pn save, the space right light blue light;
c, press Fn (at this point has been transferred to the Caps key) + right Control key exit
When the step is completed, the Fn key becomes the Caps key, and the Fn key is on the a letter key. The next step is to turn Fn on the subtitle key to the Caps key.
6) Turn on DIP switch 3, select Layer1,;
7) Press a letter key first (in this case, Fn function key), then press Caps key;
8) Turn off DIP switch 3 and finish
At this time, the Caps key becomes the Fn key, and the original Fn key becomes the Caps caps key. At this time, press the Fn caps key, the original blue light under the Caps key will light up, and get. When I need to use the cursor keys, the little finger holds down the original Caps key, and the left hand can operate with one hand. Unfortunately, the Caps and Fn keys are not the same size and cannot be changed, otherwise they are clear and perfect.
The functions of the next switches 4, 5, 6 can only be used in the default layer (the left key of the keyboard is off).
Of course, the three switches can also be combined. For example, the following switches 6 and 4 are turned on at the same time. The positions of the left Win and Alt keys are reversed, and the cursor keys are also added to the right. This I also tried it, in fact, is also good, the general Pn key rarely used, the key is the bottom row of the same size of the keycap, completely according to the actual key function to swap. However, the right Shift I use more, switch Chinese and English input method used this key, so according to the above programming steps changed.
Finally, for the average player I use, the function of this keyboard is really a bit overwhelming. If you have higher requirements in this area, this keyboard is worth having.
1, the area is small, this I put a little bit of the first;
2, although small, but the function is very powerful, especially the programming function and the DIP switch, you can completely customize the buttons according to your own preferences to make the input more convenient;
3, feel, this I think is continued after the metaphysics of HIFI metaphysics, each person's feeling is not the same, the overall use may be due to the small and exquisite keyboard reason, the feeling of input faster than the Cherry G80, high The keycap didn't bring the input discomfort as I had previously thought. As for the keycap, although it is smaller than the normal size, but there is no discomfort in the actual input, the feeling is still good, before the red axis and the current tea axis I did not feel too much difference.
4, the various features set the indicator light clear, caps the blue light under the Caps, under the space bar around a tri-color light, can be a good identification in what mode below. As for whether or not the keyboard light is needed, the benevolent sees it. If the wise sees wisdom, I don't need it. I'm not used to light pollution. (The lights on the routers at home are usually turned off. The lights on the charger and NAS are also affixed with black tape. The T530 was also specifically looking for a no-light switch.
Disadvantages:1, the back of the slot does not fix the wire very well. In practice, the keyboard is often dropped when the keyboard is moved. I feel that I can learn the bottom of the fixed telephone and do some bayonet, which can be slightly tighter;
2, slightly heavy, not suitable for commuting, the best official can also come out with a suitable size EVA box can be incorporated. (This is not a bit boring, ah, haha... that's just that.)
3, on the wireless mechanical keyboard, if you can connect Bluetooth, it is excellent, the desktop can be clean.
In the end, this keyboard is small and powerful and really worth it.
The End.
Heating system control cabinets are designed to coordinate the work of electrical heating systems. At the request of the consumer heating systems Control Cabinet can be equipped with manual or automatic control system. Additionally, optional equipment related to both control systems (manual and automatic control) and the ability to switch between them.
Electrical heating equipment cabinet assembly is carried out taking into account the specific characteristics of a particular object. Electrical heating system control cabinet, depending on requirements, is available in two options: inside building and outdoor.
Electrical heating system control cabinets can be two types: metal or plastic housing.
Due to electrical equipment installed in heating control switchboard the distribution of electrical energy maybe controlled automatically. Sensors installed in the facility, give information about ambient temperature, temperature of the object and temperature of the inner medium of the object.
Then, depending on the information received and set working modes, automatic control cabinet will switch on or switch off the heating, increase or decrease necessary temperature. Thus, the use of heating switchboard ensures proper and economical energy management, as well as rapid response and prevention of emergency situations.
Functionality of the heating systems control cabinet
Functions of heating control system may differ depending on the requirements and specifications of the customer. Main functions are:
the possibility to switch control modes (manual or automatic);
maintain the set temperature of the heated object;
operating mode control;
Heating equipment protection from overheating, over current(overload), short circuit protection;
a complete and safe shutdown of heating equipment from the power supply in case of accidents.
Glycol Heating Control Cabinet, Fuel Oil Heating Cabinet, Heating Control Cabinet, Heating Control Box, Heating Control Panel
Nantong Double Star Automation Equipment Co., Ltd. , https://www.nt-doublestar.com