As a cool mom fan, she likes cool products. Home keyboards, fans, radiators, and silicone grease are cool and exclusive, except that they lack a cool chassis. After the introduction of MasterCase5 the year before, I bought the first one for the first time.
Later, because there was no cold-displacement accessory, it was not convenient for the water to cool, and the hard disk was not enough. Fortunately, this chassis is modular, you can buy accessories upgrade, and then bought MasterCase Pro5 upgrade accessories, after some upgrades, it becomes like this.
After upgrading to MasterCase Pro5, I was very satisfied with this chassis. It is planned that this chassis will come out in five years until the new series comes out.
This year's CoolCool is also listed on the MasterCase 5 series top-level chassis - the MasterCase Maker 5T, this red and black appearance, looks pretty COOOL handle. Suddenly attracted me. Originally wanted to not change the chassis, the result did not hold back the temptation, bought MasterCase Maker5T back.
Cooler Master MasterCase Maker 5t Modular Tower Chassis (Supports ATX Motherboard/Red/Black Dual Color Design/Magnetic Panel) 1495.12 Yuan Jingdong Direct Link Chassis with packaging about 15KG weight, from the downstairs to the upstairs to tired I will die.
Comparison of MasterCase Pro5 and MasterCase Maker5T, both chassis sizes are in the middle tower type. However, the height is a match with the entire tower, because the top cover accounted for a lot of height, and Maker5T has more handles, higher height.
Mater5T's accessory box is an iron box, very delicate. The screws inside are also packed in plastic bags. Which screw is used to tear off which part can be used up in the empty space inside the box.
The use of double-sided tempered glass chassis, not very understanding why the right side also want to engage in tempered glass, their own slag line was all seen by others.
The front panel is fixed by a magnetic suction buckle, and the front panel can be tilted forward to open the optical drive or control the fan panel. The front panel has a layer of sound-absorbing cotton that reduces computer noise.
From the back, it looks like MasterCase5. It also supports seven PCI slots.
The handles on the top of the chassis changed from the front and rear handles of the MasterCase 5 to the single handles, but unlike the MasterCase 5's metal cuts, the Maker5T's handles were covered with a thick layer of rubber. Width is also more humane.
The top lid is also magnetically designed and can be capped when the top is not equipped with a fan.
The top cover is also a magnetic suction type design. The magnetic design of the chassis is very convenient in many places. Instead of using magnets, the handles are fixed with screws.
Remove the handle part and you will see the cold rack.
The top cover of MasterCase Pro5 can also be mounted on Maker5T, but it looks weird.
MasterCase Pro5's sideboards are also perfectly compatible with Maker5T. Conversely, Maker5T's toughened glass can be perfectly fitted with MasterCase Pro5. After a lap, it was found that the two chassis could be replaced except for the top cover and the front panel.
Maker5T I/O interface, from left to right are the light button (with breathing light mode, constant and off), four USB3.0 interface, fan speed adjustment button.
The left and right sides of the chassis.
The internal structure of the chassis is exactly the same as MasterCase5. The difference is that the color of the steel plate inside is red and the thickness of the plate is thick.
The interior of the Maker5T has one more card holder and red light strip than the MasterCase5.
The fan's own fan parameter is 1200RPMDC 12V 0.18A.
There is no change in the back, just a fan and light controller, four light ports, six fan ports, and control buttons on the front panel I/O port.
Cooler Master Ice God B240 CPU Cooling Radiator (Multi-Platform Support Ryzen/Dual Cavity Pump/Microflow Design/Equilibrium Fan) 429 yuan Jingdong direct link The water-cooled choice is the newly-purchased ice god B240, which supports AM4's CPU. The price is just over 400, and the price/performance ratio is still acceptable.
The next step is to start installing the motherboard.
The CPU is Ryzen7 1700X, the motherboard is ASUS X370 Pro, and the memory is Asgerd Azazar DDR4 4000Mhz 8Gx2 memory.
With the cold row bracket, the cold row can be installed and installed, and then put it in, which is much more convenient.
Put on water.
The video card is supported by the video card holder, and the video card is not afraid to bend again.
Power supply is a cool V750 full module power supply.
All installed after the effect.
The back of the line, because there is no module line, can only be installed like this, it seems a bit messy.
After the boot effect, red and white with feeling effect is OK.
The Red Dragon of Meixing Red Dragon is illuminated by the red light.
After the light bar is turned on, you can see the cool LOGO on the light bar.
After the installation of the machine effect.
The default speed of water cooling after opening the side panel is 37dB, and the full-speed speed sound is 48dB.
The default speed of water cooling after closing the side panel is 37dB, and the full-speed speed sound is 40dB. The sound is still very small.
Ryzen7 1700X with cool B240 standby temperature of 37 degrees, the baking machine maintained at 58 degrees after half an hour, the temperature control is very good.
Upholstery And Decoration Staple
Zhejiang Best Nail Industrial Co., Ltd. , https://www.beststaple.com