ETL 40W 1X4 LED Troffer Light Can Replace 120W HPS Mh 100-277VAC Ce RoHS Dlc

Model NO.: BB-RTGD- 40W-A-14-D
IP Rating: IP54
Certification: CE, RoHS, Gsg
Voltage: 100-277VAC
LED Chips: Epistar
Chips: SMD Chip
Base: 2 Pin Wires
Colour: Cold White, Warm White Natural White
Light Source: 5630 Epistar Chip
Working Lifetime(Hour): 50000
LED Source: 950PCS 2835 SMD LED
Luminous Efficacy: >130lm/W
Trademark: Bbier lighting Co, ltd
Transport Package: 65.5*65*10cm, 1PCS/CTN
Specification: CE RoHS. SGS
Origin: Shenzhen China
HS Code: 9405409000

Ce RoHS LED Troffer Light 1*4  40W to Replace 75W HPS Mh 100-277VAC
Product Description


GENERAL DESCRIPTION
40W LED 1x4 Troffer Light,LED 1x4 Troffer,LED 1x4 Troffer Retrofit Kit, 3250lm,75W HPS Equiv,available in 3,500K to 5,700K, Perfect for use in commercial applications such as offices, schools, retail locations, hospitals, and more.Easy-to-install upgrade to LED lighting in existing recessed troffers,replaces traditional fluorescent troffers.
STRUCTURE, MATERIALS, & FEATURES
1. Beam angle: 120 degrees
2. Incandescent/ MH/HPS/HID/MHL/CFL lamp retrofit
3. Precision Die Cast Aluminum Housing
4. Durale Chip and Fade Resistant Powder Coat Finish
5. Energy saving up to 70%-80%
6. Wide colour availability in degrees Kelvin(K),2700K SW / 3000K WW / 4100K NW / 5000K DW / 5700K CW
7. 50,000 hours, 5 Years Warranty
8. Easy Installation
9. UL listed power supply, ISO CE ROHS listed
Additional Information
Item No. BB-RTGD-40W-A-1x4-D
Rated Watts 40w
Input Voltage 100-277VAC/50-60HZ  |  200-480VAC available
Luminous Flux 3250lm
Driver Model UL Listed
Power Factor >0.95
Beam Angle 120°
Light Source/Count SMD LED
Color Rendering Index (CRI) Ra > 80
Operating Temperature -40° ~ 45°
Power Efficiency >88%
LED Luminous Efficiency >130.0lm/w
Color Temperature 2700K SW / 3000K WW / 4100K NW / 5000K DW / 5700K CW
LED Emitter Life 50,000 hours at 25°C
Fixture Material Precision Die Cast Aluminum Housing
Application Offices, Lobbies, Hallways & Conference Rooms in Schools, Municipalities, Libraries, Airports, Healthcare Facilities, Showrooms, Corporate Campuses, Retailers and Hospitality Environments.
The Dimensions dia598*85 (23.54*3.34in)
Packing 1pcs/CTN
SENSOR MODULE
PIR sensor
Dimming Function:
1.on @ night light
2.off@day light
3.100% on when motion detected(in night).hold time 40"(typical).if no new
motion trigger.
Note:1sensor @ 1 lamp only.
 
Dailight sensor
It supplies a simple and effective solution for daylight harvesting.Connecting to
1-10V interface and using photocell to measure ambient lux level and
automatically calculate how much artificial light is needed,and then convert the
amount of light to 1-10V dimmable control gears(ballasts or LED drivers).1-10V
dimmable control gears adjust the lighting output according to the signal from
the daylight sensor.
Note:1sensor @ 20 lamps Max
 
Microwave motion available
1.As built-in daylight sensor can read brightness value,the sensor dose not
swith on the light if with sufficient natural light.
2.Switch on the light on detection of movement,and switch off after ahold time
when there is no motion detected.
Note:1sensor @ 10 lamps Max
PICTURES SHOW




PACKAGE

 

INSTALLATION
Normally. The Traditional Tube Light has the ballast or capacitor or ignitor.
Replace Traditional Tube Light


1.Remove the Ballast,Capacitor,Ignitor.
2.Only need to put the L(live wire),N(null line) connected to the external power supply.
APPLICATION
ETL 40W 1X4 LED Troffer Light Can Replace 120W HPS Mh 100-277VAC Ce RoHS Dlc

ETL 40W 1X4 LED Troffer Light Can Replace 120W HPS Mh 100-277VAC Ce RoHS Dlc
ETL 40W 1X4 LED Troffer Light Can Replace 120W HPS Mh 100-277VAC Ce RoHS Dlc
ETL 40W 1X4 LED Troffer Light Can Replace 120W HPS Mh 100-277VAC Ce RoHS Dlc

4g Magnetic Antenna DESCRIPTION:

Application/Usage: 

Designed to be used as an outside antenna in any vehicle with steel exterior including cars, pickup trucks, vans and SUV's, it is functioned as an outdoor antenna. 

Compatibility: 
Works with 50 Ohm amplifier and accessories 

4G Magnetic Antenna Specifications: 
Frequency range: 700 MHz-2700 MHz 
VSWR: ≤1.5 
Gain:12DB 
Input impedance:50 Ω 
Coax cable:RG174 (3mm diameter) 
Wire length: 3M/10ft 
Connector Type: SMA 
Size: 32cm/12inch total height 


4g Magnetic Antenna

Supports all carriers transmitting at the following frequency bands: 
700-800 MHz 4.5DB 
824-894 MHz 5DB 
880-960 MHz 5DB 
1710-1880 MHz 9.5DB 
1850-1990 MHz 9.5DB 
2110-2170 MHz 10DB 
2500~ 2700 MHz 12DB 

4g Magnetic Antenna Package Included: 
1 x Magnet Mount Antenna with 3m Cable

4g Magnetic Antenna

4G Magnetic Antenna,4g Lte Magnetic Antenna,Yetnorson 4G LTE Magnetic Antenna,Omni 4G LTE Magnetic Antenna

YETNORSON ANTENNA CO.,LIMITED , http://www.yetnorson.com