Products advantages:
Â
Environmentally-friendly Power Generation:
Energy saving, low-carbon emission, easy and safe for power charging.
Free Charing:
Can charge iPhone, iPad, MP3,MP4 etc., wherever you go.
Portable Multifunction lighting:
Flashing light, Standard light, Hazard light can SHINE on your world during electricity
supply problems.
Emergency Self-help:
Red hazard light and power supplying function can help to survive disasters.
Â
Technical Performance:
Â
1).LED flashlight :1 white light
      A.power :1W/3W
      b.Irradiation Distance :≥800m
 2).LED hazard light :4 red lights
      A.Power :0.5W
      b.Warning Distance :≥800m
3).LED standard light :3 white light
      a.Irradiation area :≥9
 4).Storage battery :Lithium battery
      Capacity :2000/3000mAh/3.7V
5)Lighting duration (The lithium battery is full charged)Â
      a.LED flashlight :≥6H
      b.LED standard light :≥6H
      c.LED warning light :≥8H
6).Lighting duration of manual power generationÂ
      Status :manual generating power for 10min at a constant speed of 50-60r/min
      a.LED flashlight :≥40min
      b.LED standard light :≥40min
      c.LED warning light :≥80min
7).Duration of charging the Lithium battery when manual generating power
     At constant speed 50-60r/min :≤2.5H
8).Applicable circumstances :-20ºC- +50ºC
9).Storage temperature :-30ºC- +55ºC
10).Size :Φ65x210mm
11).Weight :300g
For the flex circuit Membrane Switches, there are two types. They are silver printed PET circuit and copper etched FPC circuit. Their difference and advantages&disadvantages listed bellow:
Items
Silver Printed Circuit
Copper Etched FPC Circuit
Material
PET (Polyester)
Copper
Conductor
Printed silver
Copper
Contact Fingers
Silver and Carbon
Gold plated
Contact Buttons Pads
Silver
Gold plated
Life & Reliability
normal
good
Stability
normal
good
Resistance
low
Very low
Cost
low
high
Lead Time
2-3 days
7-10 days
Pitch
0.5mm (not suggested), 1.0mm,1.27mm,2.54mm
0.5mm, 1.0mm,1.27mm,2.54mm
Usually if the membrane switches need assembled many LEDs, then we suggest to use FPC circuit, it can get more stable LED soldering quality. For the normal application the PET circuit is enough, which is more economical. In addition if the conductor pitch is 0.5mm, although we also can print it, but we still suggest to use FPC circuit. Because of that 0.5mm pitch is too small and it is easy to occur the short circuit problem.
FPC Circuit Membrane Switches,Buttons FPC Circuit Switch, FPC Circuit Electric Membrane Switch,Silicone Rubber FPC Circuit Switch
Dongguan LuPhi Electronics Technology Co., Ltd. , http://www.luphiprint.com