March 15, Consumer Rights Day, a day that focuses on consumer rights and concerns product quality. LED, as a new product, its product quality determines whether the market can be healthy and sustainable development, determines the consumer's evaluation and impression of LED products, and determines whether the terminal market can really open.
Since 2011, due to the sluggish demand in the LCD backlight market and the blind expansion of production in some areas, LED chips have experienced structural oversupply problems. How to open the general lighting market has become the key to further breakthroughs in the LED industry in the future. However, the problem of light efficiency, light color, and interface are not universal issues, especially the quality of some LED products, but the issue has seriously affected the enthusiasm of consumers to buy LED products.
Under this circumstance, many companies have issued a scream of exasperation: As a brand-new lighting technology, LED should have broad prospects for development. Do not damage the reputation of the entire industry because of the destruction of some low-quality products. Faced with the development bottleneck of the LED market, where is China's semiconductor lighting? It is no longer appropriate to take the path of low quality and low prices. The semiconductor lighting industry needs to call for a “quality culture†and use practical actions to improve product quality.
Concerned about the quality of LED products has become the consensus in the industry, a number of agencies and companies through various forms of appeal, LED product quality is the responsibility of each LED practitioners. In this special day of 3.15, China Semiconductor Lighting Network also selected some incidents that focused on the quality of LED products. We shared our vision and contributed to the healthy and orderly development of this industry.
Announced LED Products "Beijing Joint Declaration"
The quality of LED products is related to the success or failure of the development of China's semiconductor lighting industry. As early as January 9, 2012, the national semiconductor lighting engineering R&D and industry alliance steering committee and the third session of the first board meeting were held by National Semiconductor Lighting. The "Beijing Joint Declaration" advocated by the Engineering R&D and Industry Alliance was unanimously approved by the participating colleagues and signed to support them.
Nearly 300 corporate representatives have signed their support. Consensus formed by many parties: It is unanimously believed that quality awareness and quality behavior are the inevitable choices for building a harmonious society, improving people's well-being, and promoting green development. They are the inner driving force for ensuring the lasting development of China's semiconductor lighting industry and standing in the forest of the world's industries; improving product quality. It is our common social responsibility to protect consumer rights and provide efficient, energy-saving, environmentally friendly, safe and comfortable semiconductor lighting products.
Many companies stated that winning with quality is the biggest "magic weapon" for China's semiconductor lighting industry to realize its national strategic layout, business promotion and enterprise development. In the future, we will actively participate in the work of the “Semiconductor Lighting Product Quality Assurance Mark†initiated by CSA. We will be bold in releasing objective and real product data and indicators, accept social supervision and evaluation, and resolutely resist inferior products, build public confidence in consumption, and guide industrial health. Continuous development.
The signing of the "Declaration" and the gradual improvement of its quality consciousness will enable product quality to penetrate into all areas of products, services, work, and company operations, and become an important gene for creating the "overall brand image of China's semiconductor lighting."
Guangdong took the lead in promoting the use of LED lighting product quality benchmarking system to address the lack of LED lighting product standard system, LED products of uneven quality problems, the Guangdong Provincial Science and Technology Department in the country to take the lead in promoting the application of LED lighting product quality benchmarking system, and clearly defined the LED demonstration project The products that have been tested and recommended by the benchmark system must be used.
Up to now, based on the benchmarking system, a total of 4 batches of "Guangdong Provincial Green Lighting Demonstration Cities Recommended Procurement Catalogue" have been issued. 214 LED streetlight products that are used to replace 3 kinds of ordinary high-pressure sodium lamps have been recommended for the whole province, and they have become evaluation LED product quality and demonstration projects. The important basis and effective means of the effect. So far, the use of benchmarking systems to detect recommended products has not shown any quality problems and poor social responses. The successful experience of the LED lighting demonstration project shows that the use of a benchmarking system can effectively guarantee the quality of products, reduce the risks of users and investors, and avoid the negative effects that may be caused by poor product quality.
Li Xinghua, representative of the two associations, suggested that the standard system of LED lighting products should improve as soon as possible Li Xinghua, deputy to the National People's Congress and head of the Science and Technology Department of Guangdong Province: The semiconductor lighting industry is an important content of strategic emerging industries. The country should further strengthen guidance, standardization and support, and promote industry development. Bigger and stronger.
First of all, we must seek breakthroughs in the core technology of LED. China should speed up the construction of public technology platforms that cover all aspects of the industrial chain and advance the research and industrialization of upstream core technologies and equipment. Support leading companies to promote the R&D and industrialization of chips and epitaxial wafers with new technology routes, and acquire intellectual property rights through holding and cooperative R&D. Vigorously promote the construction of national laboratories and local LED companies to jointly build a major innovation platform for production and research in the province and a demonstration base for integration of production, education and research in the province to jointly tackle key core technologies and common technologies and jointly undertake demonstration project construction. We will do a good job in the development and transfer of common technologies such as modular design and packaging, high-efficiency cooling, and intelligent drive power, and create a number of key enterprises to improve the overall level of the LED industry.
The establishment of a sound quality inspection platform and standard system has been effective. Further promote the application of LED street lamp product benchmarking system, build a unified, open and authoritative LED product quality inspection platform, guide the selection of high-quality LED products.
On this basis, we must step up the preparation of local standards for different types of LED lighting products, strive to lead the preparation of several national standards for LED lighting products, improve the LED lighting product standard system, implement the market access system for product quality, and promote the healthy LED market. And orderly development.
Buddhist enterprises jointly issued a unified logo for LED lighting packaging Recently, Foshan LED lighting companies jointly issued a related organization "LED lighting product packaging logo Foshan Union standard", 3 to 5 months after the consumer will see the market marked with a warranty period , color temperature, color rendering index and other key parameters of LED lamps.
It is reported that this standard is used to provide directly to consumers of LED lighting products, including Foshan Lighting, Midea Lighting, National Star Optoelectronics, Blue Arrow Electronics, Zhaoxin Lighting, Zhongye Optoelectronics, Kathy Lighting, including 7 Foshan lighting companies must According to this standard LED lighting packaging. Alliance standard shows that in addition to the traditional parameters such as rated power and voltage, the packaging label also needs to clearly identify the product characteristics of the LED, such as photoelectric parameters (should include the rated luminous flux or luminous efficiency, color temperature, color rendering index), power factor, and product. Warranty period, product quality, related warning signs, etc.
It is worth noting that this standard is based on the United States Energy Star, requiring that the luminaire identify the warranty period rather than the theoretical lifespan currently used by many manufacturers. Wu Yulin, chairman of the Foshan Lighting Association, told reporters that LED lighting has a longer life, but due to various factors such as the module, drive control, and the structure of the lamps and lanterns, the reliability of the current LED lamps is not stable, so they are required to be marked on the labels. Product warranty period to improve product quality and protect consumer interests.
The quality of LED products not only relates to the success or failure of the development of China's semiconductor lighting industry, but also reflects the focus of corporate social responsibility. For enterprises, the expansion of employment, taxation, etc. is of course fulfilling social responsibilities. However, from the fundamental point of view of enterprises, first of all, we must pay attention to our own products so that the quality of our products will be worthy of the consumers and the general public. responsibility. Only in this way, LED companies can embark on the long-term development.
Concerned about the quality of LED products, every day is 3.15.
Since 2011, due to the sluggish demand in the LCD backlight market and the blind expansion of production in some areas, LED chips have experienced structural oversupply problems. How to open the general lighting market has become the key to further breakthroughs in the LED industry in the future. However, the problem of light efficiency, light color, and interface are not universal issues, especially the quality of some LED products, but the issue has seriously affected the enthusiasm of consumers to buy LED products.
Under this circumstance, many companies have issued a scream of exasperation: As a brand-new lighting technology, LED should have broad prospects for development. Do not damage the reputation of the entire industry because of the destruction of some low-quality products. Faced with the development bottleneck of the LED market, where is China's semiconductor lighting? It is no longer appropriate to take the path of low quality and low prices. The semiconductor lighting industry needs to call for a “quality culture†and use practical actions to improve product quality.
Concerned about the quality of LED products has become the consensus in the industry, a number of agencies and companies through various forms of appeal, LED product quality is the responsibility of each LED practitioners. In this special day of 3.15, China Semiconductor Lighting Network also selected some incidents that focused on the quality of LED products. We shared our vision and contributed to the healthy and orderly development of this industry.
Announced LED Products "Beijing Joint Declaration"
The quality of LED products is related to the success or failure of the development of China's semiconductor lighting industry. As early as January 9, 2012, the national semiconductor lighting engineering R&D and industry alliance steering committee and the third session of the first board meeting were held by National Semiconductor Lighting. The "Beijing Joint Declaration" advocated by the Engineering R&D and Industry Alliance was unanimously approved by the participating colleagues and signed to support them.
Nearly 300 corporate representatives have signed their support. Consensus formed by many parties: It is unanimously believed that quality awareness and quality behavior are the inevitable choices for building a harmonious society, improving people's well-being, and promoting green development. They are the inner driving force for ensuring the lasting development of China's semiconductor lighting industry and standing in the forest of the world's industries; improving product quality. It is our common social responsibility to protect consumer rights and provide efficient, energy-saving, environmentally friendly, safe and comfortable semiconductor lighting products.
Many companies stated that winning with quality is the biggest "magic weapon" for China's semiconductor lighting industry to realize its national strategic layout, business promotion and enterprise development. In the future, we will actively participate in the work of the “Semiconductor Lighting Product Quality Assurance Mark†initiated by CSA. We will be bold in releasing objective and real product data and indicators, accept social supervision and evaluation, and resolutely resist inferior products, build public confidence in consumption, and guide industrial health. Continuous development.
The signing of the "Declaration" and the gradual improvement of its quality consciousness will enable product quality to penetrate into all areas of products, services, work, and company operations, and become an important gene for creating the "overall brand image of China's semiconductor lighting."
Guangdong took the lead in promoting the use of LED lighting product quality benchmarking system to address the lack of LED lighting product standard system, LED products of uneven quality problems, the Guangdong Provincial Science and Technology Department in the country to take the lead in promoting the application of LED lighting product quality benchmarking system, and clearly defined the LED demonstration project The products that have been tested and recommended by the benchmark system must be used.
Up to now, based on the benchmarking system, a total of 4 batches of "Guangdong Provincial Green Lighting Demonstration Cities Recommended Procurement Catalogue" have been issued. 214 LED streetlight products that are used to replace 3 kinds of ordinary high-pressure sodium lamps have been recommended for the whole province, and they have become evaluation LED product quality and demonstration projects. The important basis and effective means of the effect. So far, the use of benchmarking systems to detect recommended products has not shown any quality problems and poor social responses. The successful experience of the LED lighting demonstration project shows that the use of a benchmarking system can effectively guarantee the quality of products, reduce the risks of users and investors, and avoid the negative effects that may be caused by poor product quality.
Li Xinghua, representative of the two associations, suggested that the standard system of LED lighting products should improve as soon as possible Li Xinghua, deputy to the National People's Congress and head of the Science and Technology Department of Guangdong Province: The semiconductor lighting industry is an important content of strategic emerging industries. The country should further strengthen guidance, standardization and support, and promote industry development. Bigger and stronger.
First of all, we must seek breakthroughs in the core technology of LED. China should speed up the construction of public technology platforms that cover all aspects of the industrial chain and advance the research and industrialization of upstream core technologies and equipment. Support leading companies to promote the R&D and industrialization of chips and epitaxial wafers with new technology routes, and acquire intellectual property rights through holding and cooperative R&D. Vigorously promote the construction of national laboratories and local LED companies to jointly build a major innovation platform for production and research in the province and a demonstration base for integration of production, education and research in the province to jointly tackle key core technologies and common technologies and jointly undertake demonstration project construction. We will do a good job in the development and transfer of common technologies such as modular design and packaging, high-efficiency cooling, and intelligent drive power, and create a number of key enterprises to improve the overall level of the LED industry.
The establishment of a sound quality inspection platform and standard system has been effective. Further promote the application of LED street lamp product benchmarking system, build a unified, open and authoritative LED product quality inspection platform, guide the selection of high-quality LED products.
On this basis, we must step up the preparation of local standards for different types of LED lighting products, strive to lead the preparation of several national standards for LED lighting products, improve the LED lighting product standard system, implement the market access system for product quality, and promote the healthy LED market. And orderly development.
Buddhist enterprises jointly issued a unified logo for LED lighting packaging Recently, Foshan LED lighting companies jointly issued a related organization "LED lighting product packaging logo Foshan Union standard", 3 to 5 months after the consumer will see the market marked with a warranty period , color temperature, color rendering index and other key parameters of LED lamps.
It is reported that this standard is used to provide directly to consumers of LED lighting products, including Foshan Lighting, Midea Lighting, National Star Optoelectronics, Blue Arrow Electronics, Zhaoxin Lighting, Zhongye Optoelectronics, Kathy Lighting, including 7 Foshan lighting companies must According to this standard LED lighting packaging. Alliance standard shows that in addition to the traditional parameters such as rated power and voltage, the packaging label also needs to clearly identify the product characteristics of the LED, such as photoelectric parameters (should include the rated luminous flux or luminous efficiency, color temperature, color rendering index), power factor, and product. Warranty period, product quality, related warning signs, etc.
It is worth noting that this standard is based on the United States Energy Star, requiring that the luminaire identify the warranty period rather than the theoretical lifespan currently used by many manufacturers. Wu Yulin, chairman of the Foshan Lighting Association, told reporters that LED lighting has a longer life, but due to various factors such as the module, drive control, and the structure of the lamps and lanterns, the reliability of the current LED lamps is not stable, so they are required to be marked on the labels. Product warranty period to improve product quality and protect consumer interests.
The quality of LED products not only relates to the success or failure of the development of China's semiconductor lighting industry, but also reflects the focus of corporate social responsibility. For enterprises, the expansion of employment, taxation, etc. is of course fulfilling social responsibilities. However, from the fundamental point of view of enterprises, first of all, we must pay attention to our own products so that the quality of our products will be worthy of the consumers and the general public. responsibility. Only in this way, LED companies can embark on the long-term development.
Concerned about the quality of LED products, every day is 3.15.
Black Bulb,T5 Blb Tube,T5 Blb Bulb,T5 Blb Light
Changxing leboom lighting product CO.Ltd. , https://www.leboomuv.com