TALEXXengine STARK NEW DLE
TALEXXmodule STARK DLE GEN2 CLASSIC
Tridonic's new generation TALEXXengine STARK NEW DLE lighting engine is more efficient, more compact and greatly reduces glare. The system consists of an LED module and matched drivers, with state-of-the-art LED technology to make the module more efficient, more economical, and ultra-low height.
In addition, the “Best LED Operating Mode (BLO)†ensures that the system always maintains the best balance between efficiency, service life and cost. The color rendering index (CRI) is greater than 80 and meets the MacAdam 3 standard. The color tolerance is extremely small, which means that the LED module can achieve very high quality illumination. The chromatic aberration is almost imperceptible, so white light has an extremely uniform appearance. The system provides white light at 3000K and 4000K standard color temperatures.
The light-emitting surface of the LED module now has a larger diameter of 65 mm. This reduces the light intensity, making it easier to reduce glare in luminaires and lighting systems. The system can achieve lower UGR values, thus opening up new applications and meeting higher lighting quality requirements. This includes computer workstations, conference rooms, schools, and other educational facilities. At the same time, the module height is reduced by 50%, and now the height is only 20mm. This gives luminaire designers greater creative freedom, especially for compact lighting solutions.
TALEXXconverterECO (1%-100% dimming range) and TALEXXconverter TOP (non-dimming) 25W and 35W drivers are perfectly matched to LED modules and are available in both built-in and stand-alone versions. When the LED module is connected to the drive, the specifications will be output. Even if the color temperature is changed, the luminous flux remains the same. Different luminous flux configurations (1,100 lm, 2,000 lm, 3,000 lm) are available to ensure simple, accurate lighting planning throughout the life of the lighting engine for up to 50,000 hours.
Like other new products from Tridonic, this system is compatible with the previous generation of modules in the application and is therefore a wise investment.
(This article is contributed by Rui Gao)

12 volt dc Outdoor Power Supply,
12 volt dc outdoor power supply,waterproof product, Our special design: simple push-pull open housing , large space, convenient installation, laser printing OEM Logo. Waterproof rate is IP65.
Features:
Simple Open Housing:Push-Pull Way.
Fixation:The Gourd type
On the Bottom:LED indicator for PSU working condition
Space Large,convenient installation
Laser Printing OEM Logo
Glass fiber board, big transformer, 2A enough power.
Fully Surface design style housing, suitable for wet, dry, damp locations
4 times aging test
Comply with IP65 standard
Protection: short-circuit,over-load,over-voltage ,over current ,
over-temperature protection
3 years warranty
Product application:
Application to CCTV cameras, indoor and outdoor cameras, monitoring equipment power supply, alarm system etc
12VDC Outdoor Power Supply,Outdoor Power Supply Box,Outdoor Power Supply Battery,Outdoor Power Supply Kit
Dongguan Xiaoerduo Electronics Co., Ltd. , https://www.steadysmps.com