Although the living room is not large, but see the width of 4.8m, do not get a projection feel sorry for Zhang Aunt .
Compared with the great gods in the forum, the system is extraordinarily simple (mainly has no money). The playback equipment consists of PS3, Gehua HD set-top box and Haimeidi Q5 video player. The display devices are Optoma hd50 projector and Samsung 46d6000 LCD TV. The speakers still use the original Logitech z5500.
Z5500 support dts and Dolby certification (do not know what it means) effect is plausible .
To facilitate the temporary use of electricity such as mobile phone charging, two power supplies are reserved at the top of the TV cabinet.
Because the video room has the function of the living room, the frequency of use of the TV is still quite high. So all three output devices need to be easily connected to the TV and projection. In order not to affect the family's rest, the Sony HW700DS wireless headset was also included. When needed, speaker systems and wireless headsets also need to seamlessly connect...
Finally choose the following program:
SONY Sony MDR-HW700DS Decoder Has Three HDMI Inputs and One Output
The HW700DS has three HDMI inputs, so each output device is first connected to the HW700DS decoder. The HW700DS has an HDMI output, which is connected to a HDMI amplifier that is connected to a TV and a projector.
Small things to solve the big problem, this goods can identify the output of the switch machine, automatically select the output.
Three devices
The set-top box and PS3 select the output of the optical fiber. The Q5 video player selects the coaxial cable to connect to the z5500. Successfully accomplished
The surrounding wires do not have a binding post, and the two connectors are reduced from the panel.
The source of the chip directly selects the memory of the millet route, and the q5 network cable connection reads the Blu-ray original disk in the route without any pressure. It is easy and simple to use.
We can't mess in a weak box
Now let's talk about the choice of projection. Originally it was hesitant between hd50 and sony's hw40. Jingdong 618 stores, hd50 straight down 900, and support 24 interest-free loans, only more than 300 a month, his wife did not say adults, directly win
The power supply and two hdmi lines are reserved in the ceiling and are routed from the pylon. The effect is clean and tidy
Projector's power switch is reserved on the wall
For the sake of environmental protection, we have chosen domestically produced Midea with a good reputation. The smell is relatively small.
The power supply and external remote controller are hidden in the ceiling, perfect
Meimei bought on Taobao does not know whether it is true or false
In order not to obstruct the bedroom door next to it, I chose a 106-inch curtain and it was completely enough to hang it up.
Finally, look at the effect
The 106-inch curtain looks just fine
Screen shot 3
Screen shot 2
Screen shot 1
For all kinds of messy wire, I said zero tolerance. In this process of home improvement, I solved this problem in this way.
1. The height of all kinds of strong and weak electricity behind the TV cabinet is 20 centimeters, so all kinds of wiring will be blocked by the TV cabinet.
2. Reserve two 50-cm power supplies at the top of the TV cabinet for temporary use such as mobile phone charging.
3, there is no need for too much strong electricity, then a plug-in board dumped in the TV cabinet, this also facilitates the maintenance of a variety of electrical equipment and wire finishing.
4. The power supply of projectors, curtains, and hdmi lines all stayed in the ceiling without leaving panels on the walls. This interface is more subtle, and extra lines can be hidden in the ceiling, convenient and flexible.
Thank you for seeing the last